BUS SWITCH. IDTQS3VH16861 Datasheet

IDTQS3VH16861 SWITCH. Datasheet pdf. Equivalent

Part IDTQS3VH16861
Description HIGH BANDWIDTH BUS SWITCH
Feature IDTQS3VH16861 2.5V / 3.3V 20-BIT FLOW-THROUGH PIN OUT, HIGH BANDWIDTH BUS SWITCH INDUSTRIALTEMPERAT.
Manufacture Integrated Device Technology
Datasheet
Download IDTQS3VH16861 Datasheet

IDTQS3VH16861 2.5V / 3.3V 20-BIT FLOW-THROUGH PIN OUT, HIGH IDTQS3VH16861 Datasheet
Recommendation Recommendation Datasheet IDTQS3VH16861 Datasheet





IDTQS3VH16861
IDTQS3VH16861
2.5V / 3.3V 20-BIT FLOW-THROUGH PIN OUT, HIGH BANDWIDTH BUS SWITCH
INDUSTRIALTEMPERATURERANGE
QUICKSWITCH® PRODUCTS 2.5V/
IDTQS3VH16861
3.3V 20-BIT FLOW-THROUGH PIN OUT,
HIGH BANDWIDTH BUS SWITCH
FEATURES:
• N channel FET switches with no parasitic diode to Vcc
Isolation under power-off conditions
No DC path to Vcc or GND
5V tolerant in OFF and ON state
• 5V tolerant I/Os
• Low RON - 4Ω typical
• Flat RON characteristics over operating range
• Rail-to-rail switching 0 - 5V
• Bidirectional dataflow with near-zero delay: no added ground
bounce
• Excellent RON matching between channels
• Vcc operation: 2.3V to 3.6V
• High bandwidth - up to 500 MHz
• LVTTL-compatible control Inputs
• Undershoot Clamp Diodes on all switch and control Inputs
• Low I/O capacitance, 4pF typical
• Available in TSSOP package
APPLICATIONS:
• Hot-swapping
• 10/100 Base-T, Ethernet LAN switch
• Low distortion analog switch
• Replaces mechanical relay
• ATM 25/155 switching
FUNCTIONAL BLOCK DIAGRAM
DESCRIPTION:
The QS3VH16861 HotSwitch with 20-bit flow-though pin out is a high
bandwidth bus switch. The QS3VH16861 has very low ON resistance,
resulting in under 250ps propagation delay through the switch. The switches
are controlled by active low enable (BEx) controls. In the ON state, the
switches can pass signals up to 5V. In the OFF state, the switches offer very
high impedence at the terminals.
The combination of near-zero propagation delay, high OFF impedance,
and over-voltage tolerance makes the QS3VH16861 ideal for high perfor-
mance communications applications.
The QS3VH16861 is characterized for operation from -40°C to +85°C.
A0
B0 A10
B10
A9 B9 A19
BE1
BE2
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
c 2013 Integrated Device Technology, Inc.
1
B19
JUNE 2013
DSC-5875/6



IDTQS3VH16861
IDTQS3VH16861
2.5V / 3.3V 20-BIT FLOW-THROUGH PIN OUT, HIGH BANDWIDTH BUS SWITCH
INDUSTRIALTEMPERATURERANGE
PIN CONFIGURATION
NC
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
GND
NC
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
GND
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
48 VCC
47 BE1
46 B0
45 B1
44 B2
43 B3
42 B4
41 B5
40 B6
39 B7
38 B8
37 B9
36 VCC
35 BE2
34 B10
33 B11
32 B12
31 B13
30 B14
29 B15
28 B16
27 B17
26 B18
25 B19
TSSOP
TOP VIEW
ABSOLUTE MAXIMUM RATINGS(1)
Symbol
Description
Max. Unit
VTERM(2) Supply Voltage to Ground
– 0.5 to 4.6
V
VTERM(3) DC Switch Voltage VS
– 0.5 to 5.5
V
VTERM(3) DC Input Voltage VIN
– 0.5 to 5.5
V
VAC AC Input Voltage (pulse width 20ns)
–3
V
IOUT DC Output Current (max. current/pin) 120 mA
TSTG StorageTemperature
-65 to +150 °C
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may
cause permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in the
operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect reliability.
2. VCC terminals.
3. All terminals except VCC.
CAPACITANCE (TA = +25oC, f = 1MHz, VIN = 0V, VOUT = 0V)
Symbol Parameter(1)
Typ. Max. Unit
CIN ControlInputs
3 5 pF
CI/O Quickswitch Channels (Switch OFF) 4
6 pF
CI/O Quickswitch Channels (Switch ON)
8
NOTE:
1. This parameter is guaranteed but not production tested.
12 pF
PIN DESCRIPTION
Pin Names
Description
BEx Active LOW Bus Enable
A0 - A19
Bus A
B 0 - B19
Bus B
FUNCTION TABLE(1)
BE1 BE2
LL
LH
A0 - A9
B0 - B9
B0 - B9
A10 - A19
B10 - B19
Z
HL
Z B10 - B19
HH
NOTE:
1. H = HIGH Voltage Level
L = LOW Voltage Level
Z = High-Impedence
Z
Z
Function
Connect
Connect B0 - B9,
Disconnect B10 - B19
Disconnect B0 - B9,
Connect B10 - B19
Disconnect
2





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)