10BASE-T/100BASE-TX Physical Layer Transceiver
KSZ8081MLX
10BASE-T/100BASE-TX Physical Layer Transceiver
Features
• Single-Chip 10BASE-T/100BASE-TX IEEE 802.3 Compli...
Description
KSZ8081MLX
10BASE-T/100BASE-TX Physical Layer Transceiver
Features
Single-Chip 10BASE-T/100BASE-TX IEEE 802.3 Compliant Ethernet Transceiver
MII Interface Support
Back-to-Back Mode Support for a 100 Mbps Copper Repeater
MDC/MDIO Management Interface for PHY Register Configuration
Programmable Interrupt Output
LED Outputs for Link and Activity Status Indication
On-Chip Termination Resistors for the Differential Pairs
Baseline Wander Correction
HP Auto MDI/MDI-X to Reliably Detect and Correct Straight-Through and Crossover Cable Connections with Disable and Enable Option
Auto-Negotiation to Automatically Select the Highest Link-Up Speed (10/100 Mbps) and Duplex (Half/Full)
Power-Down and Power-Saving Modes LinkMD® TDR-Based Cable Diagnostics to Iden-
tify Faulty Copper Cabling
Parametric NAND Tree Support for Fault Detection Between Chip I/Os and the Board
HBM ESD Rating (6 kV)
Loopback Modes for Diagnostics
Single 3.3V P...
Similar Datasheet