Object Sensors. OPB760N Datasheet

OPB760N Sensors. Datasheet pdf. Equivalent

Part OPB760N
Description Photologic Reflective Object Sensors
Feature Product Bulletin OPB760N JJuannuear1y9290606 Photologic® Reflective Object Sensors Types OPB760N, OP.
Manufacture OPTEK Technologies
Datasheet
Download OPB760N Datasheet

Photologic® Reflective Object Sensor OPB760, OPB761, OPB762, OPB760N Datasheet
Product Bulletin OPB760N JJuannuear1y9290606 Photologic® Ref OPB760N Datasheet
Recommendation Recommendation Datasheet OPB760N Datasheet




OPB760N
Product Bulletin OPB760N
JJuannuear1y9290606
Photologic® Reflective Object Sensors
Types OPB760N, OPB761N, OPB762N, OPB763N
Features
Choice of mounting configurations
Choice of output configurations
Description
The OPB760N series of reflective
assemblies feature Photologic®
output. This electrical output can be
specified as either TTL Totem Pole or
TTL Open Collector. Either may be
supplied with inverter or buffer output
polarity. All have the added stability of a
built-in hysteresis amplifier.
Mounting Options
OPB760N series PC board mount,
without mounting tabs
OPB760T series PC board mount, with
two mounting tabs
OPB770N series wire leads with
connector, without mounting tabs
OPB770T series wire leads with
connector, with two mounting tabs
RoHS
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Supply Voltage, VCC (Not to exceed 3 sec.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 V
Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40o C to +85o C
Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40o C to +70o C
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering
iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240oC(1)
Input Diode Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(2)
Output Photologic® Power Dissipation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mW(3)
Total Device Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 mW(4)
Voltage at Output Lead (Open Collector Output) . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V
Diode Forward D.C. Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA
Diode Reverse D.C. Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 V
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering.
(2) Derate linearly 2.22 mW/o C above 25o C.
(3) Derate linearly 4.44 mW/o C above 25o C.
(4) Derate linearly 6.66 mW/o C above 25o C.
(5) The OPB760N thru OPB763N series are terminated with .020" square leads designed for
printed circuit board mounting.
(6) Normal application would be with light source blocked, simulated by IF = 0mA.
(7) Tested at d = 0.080" from a 90% diffuse white test surface.
(8) Tested at d = 0.080", 0.150" and 0.220" from a 90% diffuse white test surface. Reference:
Eastman Kodak, Catalog #1257795.
(9) Tested at d = 0.080", 0.150" and 0.220" from a 5% diffuse black test surface.
(10) All parameters tested using pulse technique.
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
11-50
(972) 323-2200
Fax (972) 323-2396



OPB760N
Types OPB760N, OPB761N, OPB762N, OPB763N
Electrical Characteristics (TA = -40o C to +70o C unless otherwise noted)
SYMBOL
PARAMETER
Input Diode
VF Forward Voltage
IR Reverse Current
Output Photologic® Sensor
VCC Operating D.C. Supply Voltage
Low Level Supply Current:
Buffered Totem-Pole Output
ICCL Buffered Open-Collector Output
Inverted Totem-Pole Output
Inverted Open-Collector Output
High Level Supply Current:
Buffered Totem-Pole Output
ICCH Buffered Open-Collector Output
Inverted Totem-Pole Output
Inverted Open-Collector Output
High Level Output Voltage:
Buffered Open-Collector Output
IOH
Inverted Open-Collector Output
IF(+)
IF(+)/IF(-)
IOS
LED Positive-Going Threshold Current
Hysteresis
Short Circuit Output Current:
Buffered Totem-Pole Output
Inverted Totem-Pole Output
Low Level Output Voltage:
Buffered Totem-Pole Output
VOL Buffered Open-Collector Output
Inverted Totem-Pole Output
Inverted Open-Collector Output
Low Level Output Voltage:
VOL Buffered Totem-Pole Output
Buffered Open-Collector Output
High Level Output Voltage:
Buffered Totem-Pole Output
VOH
Inverted Totem-Pole Output
High Level Output Voltage:
VOH Inverted Totem-Pole Output
Inverted Open-Collector
MIN TYP MAX UNITS
TEST CONDITIONS
1.8 V IF = 40 mA, TA = 25o C
100 µA VR = 2 V, TA = 25o C
4.75
-15
-15
2.4
2.4
2.4
5.25 V
10
mA
VCC = 5.25 V, IF = 0 mA(6)(7)
Output Open
10
mA
VCC = 5.25 V, IF = 25 mA(7)
Output Open
10
mA
VCC = 5.25 V, IF = 25 mA(7)
Output Open
10
mA
VCC = 5.25 V, IF = 0 mA(6)(7)
Output Open
100
µA
VCC = 4.75 V, VOH = 30 V
IF = 25 mA, TA = 25o C
100
µA
VCC = 4.75 V, VOH = 30 V,
IF = 0 mA, TA = 25o C
25 mA VCC = 5 V, TA = 25o C(8)
VCC = 5 V(8)
-100
-100
mA
VCC = 5.25 V, IF = 25 mA(7)
Output = GND
mA
VCC = 5.25 V, IF = 0 mA(7)
Output = GND
0.4
V
VCC = 4.75 V, IOL = 12.8 mA
IF = 0 mA(6)(7)
0.4
V
VCC = 4.75 V, IOL = 12.8 mA
IF = 25 mA(6)(7)
0.4
V
VCC = 4.75 V, IOL = 12.8 mA
IF = 30 mA(9)
V
VCC = 4.75 V, IOH = -800 µA
IF = 25 mA(7)
V
VCC = 4.75 V, IOH = -800 µA
IF = 0 mA(6)(7)
V
VCC = 4.75 V, IOH = -800 µA
IF = 30 mA(9)
Optek reserves the right to make changes at any time in order to improve design and to supply the best possible product.
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
11-51
(972) 323-2200
Fax (972) 323-2396





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)