Operational Amplifier. PM108 Datasheet

PM108 Amplifier. Datasheet pdf. Equivalent


Part PM108
Description Low Input Current Operational Amplifier
Feature This specification documents the detailed requirements for Analog Devices space qualified die includ.
Manufacture Analog Devices
Datasheet
Download PM108 Datasheet


This specification documents the detailed requirements for A PM108 Datasheet
Recommendation Recommendation Datasheet PM108 Datasheet




PM108
This specification documents the detailed requirements for Analog Devices space qualified die including die
qualification as described for Class K in MIL-PRF-38534, Appendix C, Table C-II except as modified herein.
The manufacturing flow described in the STANDARD DIE PRODUCTS PROGRAM brochure at
http://www.analog.com/marketSolutions/militaryAerospace/pdf/Die_Broc.pdf is to be considered a part of this
specification.
This data sheet specifically details the space grade version of this product. A more detailed operational
description and a complete data sheet for commercial product grades can be found at
www.analog.com/PM108
The complete part number(s) of this specification follow:
Part Number
Description
PM108-000C
Low-Input-Current Operational Amplifier
PM108R000C
Radiation tested Low-Input-Current Operational Amplifier
1. COMP
2. -IN
3. +IN
4. V-
5. NC
6. OUT
7. V+
8. COMP



PM108
Supply Voltage (VCC)........................................................... ±22V
Input Voltage (VIN) 2/ .......................................................... ±15V
Differential Input Current 3/................................................. ±10mA
Output Short-Circuit Duration.............................................. Indefinite
Storage Temperature Range .............................................. -65°C to +150°C
Junction Temperature (TJ)………………………….………. +175°C
Ambient Temperature Range ............................................. -55°C to +125°C
Absolute Maximum Ratings Notes:
1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels
may degrade performance and affect reliability.
2/ For supply voltages less than ±15V, the absolute maximum input voltage is equal to the supply voltage.
3/ The inputs are shunted with back-to-back diodes for overvoltage protection. Therefore, if a differential input voltage in excess of 1V is
applied between the inputs, excessive current will flow, unless some limiting resistance is provided.
In accordance with class-K version of MIL-PRF-38534, Appendix C, Table C-II,
except as modified herein.
(a) Qual Sample Size and Qual Acceptance Criteria 10/0
(b) Qual Sample Package DIP
(c) Pre-screen electrical test over temperature performed post-assembly prior to die
qualification.
Table I Notes:
1/ VCC = ±20V, RS = 50Ω, VCM = 0V, and TA = 25°C, unless otherwise specified.







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)