Surface LED. ASMT-YTB8-0BA02 Datasheet

ASMT-YTB8-0BA02 LED. Datasheet pdf. Equivalent


AVAGO ASMT-YTB8-0BA02
ASMT-YTB8-0BA02
Tricolor PLCC6 Black Surface LED
Data Sheet
Description
This family of SMT LEDs is packaged in the form of PLCC-6, with
a separate heat path for each LED die, enabling it to be driven
at a higher current.
Individually addressable pin-outs give higher flexibility in
circuitry design. With closely matched radiation pattern along
the package’s X-axis, these LEDs are suitable for indoor full
color display applications. The black top surface of the LED
provides better contrast enhancement.
For easy pick and place, the LEDs are shipped in tape and reel.
Every reel is shipped from a single intensity and color bin for
better uniformity.
These LEDs are compatible with the reflow soldering process.
CAUTION
These LEDs are Class 1C ESD sensitive. Please
observe appropriate precautions during
handling and processing. Refer to Avago
Application Note AN-1142 for additional details.
CAUTION
Customers should keep the LED in the MBB
when not in use because prolonged exposure to
the environment might cause the silver-plated
leads to tarnish, which might cause difficulties in
soldering.
Features
Standard PLCC-6 package (Plastic Leaded Chip Carrier)
with individual addressable pin-out for higher flexibility of
driving configuration
LED package with diffused silicone encapsulation
Using AlInGaP and InGaN dice technologies
Typical viewing angle 120°
Compatible with reflow soldering process
JEDEC MSL 3
Water-Resistance (IPX6*) per IEC 60529:2001
* The test is conducted at the component level by
mounting the components on the PCB with proper
potting to protect the leads. Customers should perform
the necessary tests on the components for their final
applications.
Applications
Full color display
Avago Technologies
-1-


ASMT-YTB8-0BA02 Datasheet
Recommendation ASMT-YTB8-0BA02 Datasheet
Part ASMT-YTB8-0BA02
Description Tricolor PLCC6 Black Surface LED
Feature ASMT-YTB8-0BA02; ASMT-YTB8-0BA02 Tricolor PLCC6 Black Surface LED Data Sheet Description This family of SMT LEDs is .
Manufacture AVAGO
Datasheet
Download ASMT-YTB8-0BA02 Datasheet




AVAGO ASMT-YTB8-0BA02
ASMT-YTB8-0BA02
Data Sheet
Package Dimensions
2.30
4
5
6
3.00
3.40
3
2
1
Package
Marking
0.20
0.90
4
Red
5
Green
6
Blue
Lead Configuration
1 Cathode (Blue)
2 Cathode (Green)
3 Cathode (Red)
4 Anode (Red)
5 Anode (Green)
6 Anode (Blue)
NOTE
1. All dimensions are in millimeters (mm).
2. Unless otherwise specified, tolerance is ± 0.20 mm.
3. Encapsulation = silicone.
4. Terminal finish = silver plating.
3
2
1
Avago Technologies
-2-
Package Dimensions



AVAGO ASMT-YTB8-0BA02
ASMT-YTB8-0BA02
Data Sheet
Table 1. Absolute Maximum Ratings (TJ = 25 °C)
Table 1. Absolute Maximum Ratings (TJ = 25 °C)
Parameter
DC forward currenta
Peak forward current b
Power dissipation
Maximum junction temperature Tj max
Operating temperature range
Storage temperature range
a. Derate linearly as shown in Figure 7 to Figure 10.
b. Duty Factor = 10%, frequency = 1 kHz.
Red Green & Blue
50 25
100 100
125 90
110
–40 to + 100
–40 to +100
Unit
mA
mA
mW
°C
°C
°C
Table 2. Optical Characteristics (TJ = 25 °C)
Color
Luminous Intensity,
IV (mcd) @ IF = 20 mAa
Dominant Wavelength,
d (nm) @IF = 20 mAb
Peak
Wavelength, P
(nm)
@IF = 20 mA
Viewing Angle,
2½ (°)c
Test Current
(mA)
Min. Typ. Max. Min. Typ. Max.
Typ.
Typ.
Red
Green
Blue
715 938 1400 617 623 627
1400
1900
285
525
529
537
285 384 560 465 469 475
630
522
465
120 20
120
120
a. The luminous intensity Iv is measured at the mechanical axis of the LED package at a single current pulse condition. The actual peak of the spatial radiation
pattern may not be aligned with the axis.
b. The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
c. ½ is the off-axis angle where the luminous intensity is ½ the peak intensity.
Table 3. Electrical Characteristics (TJ = 25 °C)
Color
Forward Voltage,
VF (V) @IF = 20 mAa
Reverse Voltage,
Reverse Voltage,
VR (V) @ IR = 100 μAb VR (V) @ IR = 10 μAb
Min. Typ. Max.
Min.
Min.
Red
Green
Blue
1.8 2.1 2.5
2.8 3.1 3.6
2.8 3.1 3.6
4.0
4.0
4.0
a. Tolerance = ±0.1V.
b. Indicates product final testing condition. Long-term reverse bias is not recommended.
Thermal Resistance,
RJ-S (°C/W)
1 Chip On
280
240
240
3 Chips On
330
357
357
Avago Technologies
-3-





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)