Infrared Communications Controller Chip CameraFR
CAM35C44
ADVANCE INFORMATION
Infrared Communications Controller Chip CameraFR
FEATURES
!" Mixed Voltage Support Support...
Description
CAM35C44
ADVANCE INFORMATION
Infrared Communications Controller Chip CameraFR
FEATURES
!" Mixed Voltage Support Supports 3.3V Operation Supports Mixed Internal 3.3V Operation with 3.3V/5V External Configuration Intelligent Auto Power Management Supports Multiple Power Down Modes Serial Port High Speed NS16C550A Compatible UART with 16-Byte Send/Receive FIFOs Programmable Baud Rate Generator Infrared Port Multi-Protocol Infrared Interface 128-Byte Data FIFO IrDA 1.1 Compliant (up to 4Mbps) Consumer IR SHARP ASK IR Programmed I/O and DMA Options !" !" Up to 5 General Purpose I/O Pins Programmable Multi-Protocol Host Interface ISA-Style 5 Bit Address and 8 Bit Data Bus IOCHRDY and No Wait State Support for Fast IR Non-ISA 8 Bit Multiplexed Address/Data Bus Programmable Read/Write Interface One 8 Bit DMA Channel One Programmable IRQ Chip Select Multihost Interface Support Includes Hitachi and Mitsubishi Microcontrollers 24MHz Crystal Oscillator Supports Internal or External Clock Source 48 Pin TQFP Package
!" !"
!"
!" !"
GENERAL DESCRIPTION
The CAM35C44 with IrDA v1.1 (4Mbps) and Consumer IR support incorporates SMSC’s advanced Infrared Communications Controller (IrCC 2.0), a 16C550A-compatible UART, Multiple Host Interface options, flexible Address Decoding and up to five General Purpose I/Os. The CAM35C44 also features sophisticated power control circuitry to support multiple power down modes, an on-chip 24MHz crystal oscillator, and 12mA host bus drivers. The CAM35C44 is ...
Similar Datasheet