Data Sheet
Dual 3 MHz, 1200 mA Buck Regulators and Two 300 mA LDO Regulators With Precision Enable and Power-Good Outpu...
Data Sheet
Dual 3 MHz, 1200 mA Buck
Regulators and Two 300 mA LDO
Regulators With Precision Enable and Power-Good Output
ADP5134
FEATURES
Main input voltage range of 2.5 V to 5.5 V Two 1200 mA buck
regulators and two 300 mA LDO
regulators 24-lead, 4 mm × 4 mm LFCSP package
Regulator accuracy of ±1.8% Factory programmable or external adjustable VOUTx Precision enable pins for easier power sequencing Factory selectable power-good pin 3 MHz buck operation with forced PWM and automatic
PWM/PSM modes BUCK1/BUCK2: output voltage range from 0.8 V to 3.8 V LDO1/LDO2: output voltage range from 0.8 V to 5.2 V LDO1/LDO2: input voltage range from 1.7 V to 5.5 V LDO1/LDO2: high PSRR and low output noise
APPLICATIONS
Power for processors, application specific integrated circuits (ASICs), field programmable gate arrays (FPGAs), and radio frequency (RF) chipsets
Portable instrumentation and medical devices Space constrained devices
GENERAL DESCRIPTION
The ADP5134 combines two high performance buck
regulators and two low dropout (LDO)
regulators. It is available in a 24-lead 4 mm × 4 mm LFCSP.
The high switching frequency of the buck
regulators enables tiny multilayer external components and minimizes the board space. When the MODE pin is set to high, the buck
regulators operate in forced pulse-width modulation (PWM) mode. When the MODE pin is set to low, the buck
regulators operate in PWM mode when the load is above a predefined threshold. When the load current falls below a predefined thr...