GaAs MMIC MIXER
MIXERS - CHIP
v01.0314
Typical Applications
The HMC1106 is ideal for: • Microwave Point-to-Point Radios • VSAT & SATCOM...
Description
MIXERS - CHIP
v01.0314
Typical Applications
The HMC1106 is ideal for: Microwave Point-to-Point Radios VSAT & SATCOM Test Equipment & Sensors Military End-Use Automotive Radar
Functional Diagram
HMC1106
GaAs MMIC MIXER 15 - 36 GHz
Features
Passive: No DC Bias Required
Low LO Power: +15 dBm
LO/RF Isolation: 38 dB
LO/IF Isolation: 32 dB
RF/IF Isolation: 25 dB
Wide IF Bandwidth: DC to 24 GHz
Die Size: 1.79 x 1.46 x 0.1 mm
General Description
The HMC1106 is a double-balanced mixer which can be used as a downconverter with DC to 24 GHz at the IF port, 20 to 50 GHz at the LO port, and 15 to 36 GHz at the RF port. This passive MMIC mixer is fabricated with GaAs Shottky diode technology. All bond pads and the die backside are Ti/Au metallized and the Shottky devices are fully passivated for reliable operation. All data shown herein is measured with the chip in a 50 Ohm environment and contacted with RF probes.
Electrical Specifications, TA = +25° C, LO = 36.1 GHz, LO = +15 dBm, LSB [1]
Parameter
Min.
Typ.
Max. Min.
Typ.
Max
Min.
Typ.
RF Frequency Range
15 -24
24 - 27
27 - 36
LO Frequency Range
20 - 50
IF Frequency Range Conversion Loss
9 12
DC - 24 11
14
10
LO to RF Isolation LO to IF Isolation [2] RF to IF Isolation [3] IP3 (Input)
38 25 32 15 22
16
38 25 32 15 18
16
38 25 32 15 25
22
Max 14
Units GHz GHz GHz dB dB
dB
dB dBm
[1] Unless otherwise noted , all measurements performed as downconverter with LO Frequency = 36.1 GHz and LO Power = +15 d...
Similar Datasheet