Balanced Mixer. ADL5353 Datasheet

ADL5353 Mixer. Datasheet pdf. Equivalent

ADL5353 Datasheet
Recommendation ADL5353 Datasheet
Part ADL5353
Description 2200 MHz to 2700 MHz Balanced Mixer
Feature ADL5353; Data Sheet 2200 MHz to 2700 MHz Balanced Mixer, LO Buffer, IF Amplifier, and RF Balun ADL5353 FEAT.
Manufacture Analog Devices
Datasheet
Download ADL5353 Datasheet




Analog Devices ADL5353
Data Sheet
2200 MHz to 2700 MHz Balanced Mixer,
LO Buffer, IF Amplifier, and RF Balun
ADL5353
FEATURES
Frequency ranges of 2200 MHz to 2700 MHz (RF) and 30 MHz
to 450 MHz (IF)
Power conversion gain: 8.7 dB
Input IP3 of 24.5 dBm and Input P1dB of 10.4 dBm
SSB noise figure of 9.8 dB
Typical LO drive of 0 dBm
Single-ended, 50 Ω RF and LO input ports
High isolation SPDT LO input switch
Single-supply operation: 3.3 V to 5 V
Exposed pad, 5 mm × 5 mm 20-lead LFCSP
1500 V HBM/500 V FICDM ESD performance
APPLICATIONS
Cellular base station receivers
Transmit observation receivers
Radio link downconverters
GENERAL DESCRIPTION
The ADL5353 uses a highly linear, doubly balanced passive
mixer core along with integrated RF and local oscillator (LO)
balancing circuitry to allow for single-ended operation. The
ADL5353 incorporates an RF balun to provide optimal perfor-
mance over a 2200 MHz to 2700 MHz input frequency range
using high-side LO. The balanced passive mixer arrangement
provides good LO-to-RF leakage, typically better than −36 dBm,
and excellent intermodulation performance.
The balanced mixer core also provides extremely high input
linearity, allowing the device to be used in demanding cellular
applications where in-band blocking signals might otherwise
result in the degradation of dynamic performance. A high
linearity IF buffer amplifier follows the passive mixer core to yield a
typical power conversion gain of 8.8 dB and can be used with a
wide range of output impedances.
FUNCTIONAL BLOCK DIAGRAM
IFGM
20
IFOP
19
IFON
18
PWDN
17
LEXT
16
VPIF 1
ADL5353
15 LOI2
RFIN 2
14 VPSW
RFCT 3
COMM 4
BIAS
GENERATOR
13 VGS1
12 VGS0
COMM 5
11 LOI1
6
VLO3
7
LGM3
8
VLO2
9
LOSW
10
NC
NC = NO CONNECT
Figure 1.
The ADL5353 provides two switched LO paths that can be used
in TDD applications where it is desirable to rapidly switch between
two local oscillators. LO current can be externally set using a
resistor to minimize dc current commensurate with the desired
level of performance. For low voltage applications, the ADL5353
is capable of operation at voltages down to 3.3 V with
substantially reduced current. For low voltage operation, an
additional logic pin is provided to power down (<200 µA) the
circuit when desired.
The ADL5353 is fabricated using a BiCMOS high performance
IC process. The device is available in a 5 mm × 5 mm, 20-lead
LFCSP and operates over a −40°C to +85°C temperature range.
An evaluation board is also available.
Table 1. Passive Mixers
Single
RF Frequency (MHz) Mixer
500 to 1700
ADL5367
1200 to 2500
ADL5365
2300 to 2900
ADL5363
Single Mixer
and IF Amp
ADL5357
ADL5355
ADL5353
Dual Mixer
and IF Amp
ADL5358
ADL5356
ADL5354
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2010–2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com



Analog Devices ADL5353
ADL5353* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
EVALUATION KITS
ADL5353 Evaluation Board
DOCUMENTATION
Data Sheet
ADL5353: 2200 MHz to 2700 MHz Balanced Mixer, LO
Buffer, IF Amplifier, and RF Balun Data Sheet
TOOLS AND SIMULATIONS
• ADIsimPLL™
ADIsimRF
REFERENCE MATERIALS
Product Selection Guide
RF Source Booklet
DESIGN RESOURCES
ADL5353 Material Declaration
PCN-PDN Information
Quality And Reliability
Symbols and Footprints
DISCUSSIONS
View all ADL5353 EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.



Analog Devices ADL5353
ADL5353
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
General Description ......................................................................... 1
Functional Block Diagram .............................................................. 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
5 V Performance Specifications.................................................. 3
3.3 V Performance Specifications............................................... 4
Absolute Maximum Ratings............................................................ 5
ESD Caution.................................................................................. 5
Pin Configuration and Function Descriptions............................. 6
Typical Performance Characteristics ............................................. 7
5 V Performance ........................................................................... 7
3.3 V Performance...................................................................... 14
REVISION HISTORY
2/15—Rev. 0 to Rev. A
Changes to Table 1............................................................................ 1
Deleted R9 from 5 V Performance Section................................... 7
Deleted Figure 41; Renumbered Sequentially............................. 13
Changes to Figure 41...................................................................... 13
Changes to Figure 51...................................................................... 19
Changes to Table 7.......................................................................... 20
Updated Outline Dimensions ....................................................... 22
Changes to Ordering Guide .......................................................... 22
10/10—Revision 0: Initial Version
Data Sheet
SPUR TABLES ................................................................................ 15
Spur Tables .................................................................................. 15
Circuit Description......................................................................... 16
RF Subsystem.............................................................................. 16
LO Subsystem ............................................................................. 16
Applications Information .............................................................. 18
Basic Connections...................................................................... 18
Bias Resistor Selection ............................................................... 18
Mixer VGS Control DAC .......................................................... 18
Evaluation Board ............................................................................ 19
Outline Dimensions ....................................................................... 22
Ordering Guide .......................................................................... 22
Rev. A | Page 2 of 24







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)