Line Driver/Receiver. ADM3252E Datasheet

ADM3252E Driver/Receiver. Datasheet pdf. Equivalent

ADM3252E Datasheet
Recommendation ADM3252E Datasheet
Part ADM3252E
Description RS-232 Line Driver/Receiver
Feature ADM3252E; Data Sheet Isolated, Dual Channel, RS-232 Line Driver/Receiver ADM3252E 10µF 0.1µF 10515-001 FEAT.
Manufacture Analog Devices
Datasheet
Download ADM3252E Datasheet




Analog Devices ADM3252E
Data Sheet
Isolated, Dual Channel, RS-232 Line
Driver/Receiver
ADM3252E
FEATURES
2.5 kV fully isolated (power and data) RS-232 transceiver
isoPower integrated, isolated dc-to-dc converter
Operational from single 3.3 V or 5 V supply
460 kbps data rate
2 × Tx and 2 × Rx channels
Meets EIA/TIA-232E specifications
ESD protection to IEC 61000-4-2 on RINx and TOUTx pins
Contact discharge: ±8 kV
Air gap discharge: ±15 kV
0.1 μF charge pump capacitors
High common-mode transient immunity: >25 kV/μs
Safety and regulatory approvals (pending)
UL recognition
2500 V rms for 1 minute per UL 1577
VDE certificate of conformity
IEC 60747-5-2 (VDE 0884, Part 2)
VIORM = 560 V peak
CSA Component Acceptance Notice #5A
Operating temperature range: −40°C to +85°C
44-ball chip scale package ball grid array (CSP_BGA)
APPLICATIONS
Isolated RS-232 interface
High noise data communications
Industrial communications
Industrial/telecommunications diagnostic ports
Medical equipment
GENERAL DESCRIPTION
The ADM3252E is a high speed, 2.5 kV, fully isolated, dual-
channel RS-232/V.28 transceiver device that is operational from
a single 3.3 V or 5 V power supply. Because of high ESD protection
on the RIN1, RIN2, TOUT1, and TOUT2 pins, the ADM3252E is ideally
suited for operation in electrically harsh environments or where
RS-232 cables are frequently plugged and unplugged.
The ADM3252E provides four independent isolation channels
using the integrated and isolated power of isoPower™. There is
no requirement to use a separate isolated dc-to-dc converter. Chip
scale transformer iCoupler® technology from Analog Devices, Inc.,
is used for both the isolation of the logic signals and the integrated
dc-to-dc converter. The result is a total isolation solution.
FUNCTIONAL BLOCK DIAGRAM
C1
0.1µF
16V
C3
0.1µF
10V
10µF
0.1µF
C2
0.1µF
16V
C4
0.1µF
16V
ADM3252E
VCC
ROUT1
TIN1
ROUT2
TIN2
OSC
DECODE
ENCODE
DECODE
ENCODE
C1+ C1– V+ VISO
VOLTAGE
DOUBLER
C2+ C2– V–
VOLTAGE
INVERTER
RECT REG
ENCODE
DECODE
ENCODE
DECODE
R RIN1*
T TOUT1
R RIN2*
T TOUT2
GND
GNDISO
*INTERNAL 5kPULL-DOWN RESISTOR ON THE RS-232 INPUTS.
Figure 1.
isoPower technology in the ADM3252E uses high frequency
switching elements to transfer power through its transformer.
Special care must be taken during printed circuit board (PCB)
layout to meet emissions standards. Refer to the AN-0971
Application Note, Recommendations for Control of Radiated
Emissions with isoPower Devices, for details on board layout
considerations.
The ADM3252E conforms to the EIA/TIA-232E and ITU-T V.28
specifications and operates at data rates of up to 460 kbps. Four
external 0.1 μF charge pump capacitors are used for the voltage
doubler/inverter, permitting operation from a single 3.3 V or 5 V
supply. The ADM3252E is available in a 44-ball, chip scale
package ball grid array (CSP_BGA) and is specified over the
−40°C to +85°C temperature range.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2012–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com



Analog Devices ADM3252E
ADM3252E* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
EVALUATION KITS
ADM3252E Evaluation board
• ezLINX™ iCoupler® Isolated Interface Development
Environment
DOCUMENTATION
Application Notes
AN-740: iCoupler Isolation in RS-232 Applications
Data Sheet
ADM3252E: Isolated, Dual Channel, RS-232 Line Driver/
Receiver Data Sheet
User Guides
UG-400: ezLINX iCoupler Isolated Interface Development
Environment Hardware User Guide
UG-440: Evaluating the ADM3252E Isolated, Dual Channel,
RS-232 Line Driver/Receiver
UG-461: ezLINX iCoupler Isolated Interface Development
Environment Software User Guide
REFERENCE DESIGNS
CN0373
REFERENCE MATERIALS
Press
Analog Devices Achieves Major Milestone by Shipping 1
Billionth Channel of iCoupler Digital Isolation
Product Selection Guide
Digital Isolator Product Selection and Resource Guide
DESIGN RESOURCES
ADM3252E Material Declaration
PCN-PDN Information
Quality And Reliability
Symbols and Footprints
DISCUSSIONS
View all ADM3252E EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.



Analog Devices ADM3252E
ADM3252E
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
Functional Block Diagram .............................................................. 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Package Characteristics ............................................................... 4
Regulatory Information (Pending) ............................................ 4
Insulation and Safety-Related Specifications............................ 5
Absolute Maximum Ratings ....................................................... 6
ESD Caution.................................................................................. 6
Pin Configuration and Function Descriptions............................. 7
Typical Performance Characteristics ............................................. 8
Theory of Operation ...................................................................... 10
Isolation of Power and Data...................................................... 10
REVISION HISTORY
1/13—Rev. 0 to Rev. A
Changes to Features Section............................................................ 1
Changes to Figure 20...................................................................... 12
4/12—Revision 0: Initial Version
Data Sheet
Charge Pump Voltage Converter ............................................. 11
3.3 V Logic to EIA/TIA-232E Transmitter ............................. 11
EIA/TIA-232E to 3.3 V Logic Receiver ................................... 11
High Baud Rate........................................................................... 11
Applications Information .............................................................. 12
PCB Layout ................................................................................. 12
Start-Up Behavior....................................................................... 12
DC Correctness and Magnetic Field Immunity..................... 13
Power Considerations................................................................ 13
Thermal Analysis ....................................................................... 14
Insulation Lifetime ..................................................................... 14
Packaging and Ordering Information ......................................... 15
Outline Dimensions................................................................... 15
Ordering Guide .......................................................................... 15
Rev. A | Page 2 of 16







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)