GaAs MMIC. NJG1649HB6 Datasheet

NJG1649HB6 MMIC. Datasheet pdf. Equivalent

NJG1649HB6 Datasheet
Recommendation NJG1649HB6 Datasheet
Part NJG1649HB6
Description SPDT SWITCH GaAs MMIC
Feature NJG1649HB6; .
Manufacture New Japan Radio
Datasheet
Download NJG1649HB6 Datasheet




New Japan Radio NJG1649HB6
NJG1649HB6
SPDT SWITCH GaAs MMIC
Q GENERAL DESCRIPTION
Q PACKAGE OUTLINE
NJG1649HB6 is a GaAs SPDT switch IC suited for W-LAN,
Bluetooth and sub-microwave applications.
This device can operate a single bit control signal from
+1.3V.
The ultra-small & ultra-thin USB8-B6 package is adopted.
NJG1649HB6
Q FEATURES
O Single bit control
O Low voltage operation
O Low insertion loss
O Input power at 0.2dB compression point
O High isolation
O Small & thin package
+1.3V min.
+2.5~+4.5V
0.35dB typ. @f=1.0GHz, PIN=23dBm, VDD=2.7V
0.40dB typ. @f=2.0GHz, PIN=23dBm, VDD=2.7V
0.45dB typ. @f=2.5GHz, PIN=23dBm, VDD=2.7V
30dBm typ. @f=2.5GHz, VDD=2.7V
27dB typ. @f=1.0GHz, PIN=23dBm, VDD=2.7V
22dB typ. @f=2.0GHz, PIN=23dBm, VDD=2.7V
20dB typ. @f=2.5GHz, PIN=23dBm, VDD=2.7V
USB8-B6 (Package size: 1.5x1.5x0.55mm)
Q PIN CONFIGURATION
USB8-B6 Type
(TOP VIEW)
4
53
62
71
8
Pin connection
1. P1
2. GND
3. P2
4. GND
5. VCTL
6. PC
7. VDD
8. GND
Q TRUTH TABLE
Control Voltage: “H”=VCTL (H), “L”=VCTL (L)
VCTL
PATH
H P1-PC
L P2-PC
NOTE: The information on this datasheet is subject to change without notice.
2007-07-20
-1-



New Japan Radio NJG1649HB6
NJG1649HB6
Q ABSOLUTE MAXIMUM RATINGS
PARAMETER
RF input power
Supply voltage
Control voltage
Power dissipation
Operating temp.
Storage temp.
SYMBOL
CONDITIONS
PIN
VDD
VCTL
PD
Topr
Tstg
VDD=2.7V, VCTL=0V/1.8V
VDD terminal
VCTL terminal
On PCB board
(Ta=+25°C, Zs=Zl=50Ω)
CONDITIONS UNITS
32 dBm
5.0 V
5.0
160
-40~+85
-55~+150
V
mW
°C
°C
Q ELECTRICAL CHARACTERISTICS
(General conditions: Ta=+25°C, VCTL (L)=0V, VCTL (H)=1.8V, Zs=Zl=50Ω with application circuit)
PARAMETERS
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Supply voltage
Operating current
Control voltage (LOW)
VDD
IDD
VCTL (L)
f=2.5GHz, PIN=23dBm
2.5 2.7 4.5
V
- 20 40 μA
0 - 0.4 V
Control voltage (HIGH) VCTL (H)
1.3 1.8 4.5
V
Control current
Insertion loss 1
Insertion loss 2
Insertion loss 3
Isolation 1
Isolation 2
ICTL
LOSS1
LOSS2
LOSS3
ISL1
ISL2
f=1.0GHz, PIN=23dBm
f=2.0GHz, PIN=23dBm
f=2.5GHz, PIN=23dBm
f=1.0GHz, PIN=23dBm
f=2.0GHz, PIN=23dBm
- 3 10 μA
-
0.35 0.50
dB
-
0.40 0.55
dB
-
0.45 0.60
dB
24 27 - dB
19 22 - dB
Isolation 3
ISL3 f=2.5GHz, PIN=23dBm 17 20 - dB
Input power at 0.2dB
compression point
P-0.2dB f=2.5GHz
28 30
- dBm
VSWR
VSWR f=0.1~2.5GHz, ON State
-
1.1 1.3
Switching time
TSW
- 1 5 μs
-2-



New Japan Radio NJG1649HB6
NJG1649HB6
Q TERMINAL INFORMATION
No. SYMBOL
DESCRIPTION
RF port. This port is connected to PC port by control voltage of
1 P1 +1.3~4.5V(VCTL(H)) at 5th pin. In order to block DC bias voltage of internal
circuit, an external capacitor is required.
2
GND
Ground terminal. Please connect this terminal with ground plane as
close as possible for good RF performance.
RF port. This port is connected to PC port by control voltage of
3 P2 +0.0~0.4V(VCTL(L)) at 5th pin. In order to block DC bias voltage of internal
circuit, an external capacitor is required.
4
GND
Ground terminal. Please connect this terminal with ground plane as
close as possible for good RF performance.
Control port. This terminal is set to +1.3V~4.5V of logical high level for
5 VCTL ON state between PC and P1 RF ports, and set to +0.0~0.4V of logical
low level for ON state between PC and P2 RF ports.
Common RF port. This PC port is connected to P1 or P2 by logical
6
PC
control voltage of VCTL.
In order to block DC bias voltage of internal circuit, an external capacitor
is required.
7
VDD
A supply voltage terminal (+2.5~+4.5V). Please place a bypass
capacitor between this and GND for avoiding RF noise from outside.
8
GND
Ground terminal. Please connect this terminal with ground plane as
close as possible for good RF performance.
-3-







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)