GaAs MMIC. NJG1666MD7 Datasheet

NJG1666MD7 MMIC. Datasheet pdf. Equivalent

NJG1666MD7 Datasheet
Recommendation NJG1666MD7 Datasheet
Part NJG1666MD7
Description HIGH ISOLATION SPDT SWITCH GaAs MMIC
Feature NJG1666MD7; NJG1666MD7 HIGH ISOLATION SPDT SWITCH GaAs MMIC I GENERAL DESCRIPTION I PACKAGE OUTLINE The NJG1.
Manufacture New Japan Radio
Datasheet
Download NJG1666MD7 Datasheet




New Japan Radio NJG1666MD7
NJG1666MD7
HIGH ISOLATION SPDT SWITCH GaAs MMIC
I GENERAL DESCRIPTION
I PACKAGE OUTLINE
The NJG1666MD7 is a GaAs SPDT switch designed for Set-top boxes, TV
tuners, CATV tuners, and sub-microwave applications. The NJG1666MD7
features high isolation, low insertion loss and covering a broad frequency
range up to 3GHz. The NJG1666MD7operates single bit control switching
by control voltage from 1.3V to 4.5V, and includes ESD protection circuits
for good ESD tolerance. The NJG1666MD7 is available in a very small,
NJG1666MD7
lead-free, halogen-free, 1.6mm x 1.6mm x 0.397 mm, 14-pin EQFN14-D7
package.
I APPLICATIONS
Terrestrial and Satellite applications
Set-top box, TV tuner, CATV tuner, Digital TV and Cable TV applications
I FEATURES
G Low operating voltage
G Low control voltage
G Low current consumption
G High isolation
G Low insertion loss
G High ESD tolerance
G Ultra- small and ultra-thin package
G Lead and halogen-free
VDD =+2.0~+4.5V
VCTL(H)=+1.3V min
30µA typ.
70dB typ.
@f=0.25GHz
60dB typ.
@f=1.0GHz
60dB typ.
@f=2.2GHz
0.40dB typ.
@f=0.25GHz
0.45dB typ.
@f=1.0GHz
0.50dB typ.
@f=2.2GHz
On-chip ESD protection circuit
EQFN14-D7 (package size: 1.6mm x 1.6mm x 0.397mm typ.)
I PIN CONFIGURATION
1
(Top view)
14 13 12
11
2 10
39
48
567
Pin Connection
1. NC(GND) 8. NC(GND)
2. P2
9. GND
3. GND
10. P1
4. NC(GND) 11. NC(GND)
5. GND
12. VDD
6. PC
13. GND
7. GND
14. CTL
I TRUTH TABLE
“H”=VCTL(H), “L”=VCTL(L)
CTL
H
L
PATH
PC-P1
PC-P2
NOTE: The information on this datasheet is subject to change without notice
Ver.2013-05-07
-1-



New Japan Radio NJG1666MD7
NJG1666MD7
I ABSOLUTE MAXIMUM RATINGS
PARAMETER
RF Input power
Supply voltage
Control voltage
Power dissipation
Operating temp.
Storage temp.
SYMBOL
CONDITIONS
PIN VDD=3.0V
VDD VDD terminal
VCTL CTL terminal
PD
Four-layer FR4 PCB with through-hole
(74.2mmx74.2mm), Tj=150°C
Topr
Tstg
(Ta=25°C, Zs=Zl=50)
RATINGS UNITS
28 dBm
5.0 V
5.0 V
1300
mW
-40~+85
°C
-55~+150
°C
I ELECTRICAL CHARACTERISTICS 1 (DC)
(General conditions: VDD=3.0V, VCTL (L)=0V, VCTL (H)=3.0V, Zs=Zl=50, Ta=+25°C, with application circuit)
PARAMETER SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Supply voltage
Operating current
Control voltage (L)
Control voltage (H)
Control current
VDD
IDD
VCTL(L)
VCTL(H)
ICTL
2.0 3.0 4.5
- 30 60
0 - 0.4
1.3 3.0 4.5
- 15 30
V
µA
V
V
µA
I ELECTRICAL CHARACTERISTICS 2 (RF)
(General conditions: VDD=3.0V, VCTL (L)=0V, VCTL (H)=3.0V, Zs=Zl=50, Ta=+25°C, with application circuit)
PARAMETER SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Insertion loss 1
LOSS1 f=250MHz, PIN=0dBm
- 0.40 0.60 dB
Insertion loss 2
LOSS2 f=1000MHz, PIN=0dBm
- 0.45 0.65 dB
Insertion loss 3
LOSS3 f=2200MHz, PIN=0dBm
- 0.50 0.70 dB
Isolation 1
ISL1 f=250MHz, PIN=0dBm
65 70
-
dB
Isolation 2
ISL2 f=1000MHz, PIN=0dBm
55 60
-
dB
Isolation 3
Input power at 1dB
compression point
VSWR
ISL3
P-1dB
VSWR
f=2200MHz, PIN=0dBm
f=2200MHz
f=2200MHz, ON state
55 60
-
dB
23 27 - dBm
- 1.3 1.5
Switching time
TSW 50% VCTL to 10%/90% RF - 1 5 µs
-2-



New Japan Radio NJG1666MD7
NJG1666MD7
I TERMINAL INFORMATION
No. SYMBOL
DESCRIPTION
This port is connected to PC port by applying the control voltage 0~+0.4
2 P2 V(VCTL(L)) to 14th pin. An external capacitor is required to block the DC
bias voltage of internal circuit.
Common RF port. This PC port is connected to P1 or P2 by logical
6 PC control voltage of 14th pin. In order to block DC bias voltage of internal
circuit, an external capacitor is required.
This port is connected to PC port by applying control voltage of
10 P1 +1.3~+4.5 V (VCTL(H)) to 14th pin. An external capacitor is required to
block the DC bias voltage of internal circuit.
A supply voltage terminal (+2.0~+4.5 V). Place a bypass capacitor
12
VDD
between this terminal and ground plane for avoiding RF noise from
outside.
14
CTL
Control signal input terminal. This terminal is set to High-Level
(+1.3~+4.5 V) or Low-Level (0~+0.4 V).
1,4,8,11
NC
(GND)
No connected terminal. This terminal is not connected with internal
circuit. Connect to the PCB ground plane.
3,5,7,
9,13
GND
Ground terminal. Connect this terminal with ground plane as close as
possible for excellent RF performance.
-3-







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)