Audio Amplifier. SSM3515 Datasheet

SSM3515 Amplifier. Datasheet pdf. Equivalent

SSM3515 Datasheet
Recommendation SSM3515 Datasheet
Part SSM3515
Description Class-D Digital Input Audio Amplifier
Feature SSM3515; Data Sheet 31 W, Filterless, Class-D Digital Input Audio Amplifier SSM3515 FEATURES Filterless dig.
Manufacture Analog Devices
Datasheet
Download SSM3515 Datasheet




Analog Devices SSM3515
Data Sheet
31 W, Filterless, Class-D Digital Input
Audio Amplifier
SSM3515
FEATURES
Filterless digital input, mono Class-D amplifier
Operates from a single 4.5 V to 17 V supply
31.3 W output power, 17 V supply, and 4 Ω load at 1% THD + N
107 dB A-weighted signal-to-noise ratio
93.3% efficiency into 8 Ω load at 12 V
I2C control with up to 4 pin selectable slots/addresses
Supports multiple serial data formats up to TDM16
Digital interface supports sample rates from 8 kHz to 192 kHz
Flexible digital and analog gain adjustment
Flexible supply monitoring AGC function
6.55 mA quiescent current with single 17 V PVDD supply
Short-circuit and thermal protection, thermal warning
20-ball, 1.8 mm × 2.2 mm, 0.4 mm pitch WLCSP
Pop and click suppression
User selectable ultralow EMI emissions mode
Power-on reset
APPLICATIONS
Notebooks
Portable electronics
Home audio
GENERAL DESCRIPTION
The SSM3515 is a fully integrated, high efficiency, mono Class-D
audio amplifier with digital inputs. The application circuit
requires a minimum of external components and can operate
from a single 4.5 V to 17 V supply. It can deliver 8.4 W of output
power into an 8 Ω load or 15.8 W into an 4 Ω load from a 12 V
power supply, or 31.3 W into an 4 Ω load from a 17 V power
supply, all with 1% THD + N.
The SSM3515 features a high efficiency, low noise modulation
scheme that requires no external LC output filters. This scheme
provides high efficiency even at low output power. It operates
with 92% efficiency at 7 W into an 8 Ω load or 88% efficiency at
15 W into 4 Ω from a 12 V supply.
Spread spectrum pulse density modulation provides lower EMI
radiated emissions compared with other Class-D architectures,
particularly above 100 MHz.
The digital input eliminates the need for an external digital-to-
analog converter (DAC). The SSM3515 has a micropower
shutdown mode with a typical shutdown current of 39 nA at
the 12 V PVDD supply. The device also includes pop and click
suppression circuitry that minimizes voltage glitches at the
output during turn on and turn off.
The SSM3515 operates with or without an I2C control interface.
The SSM3515 is specified over the commercial temperature range
(−40C to +85C). It has built in thermal shutdown and output
short-circuit protection. It is available in a halide-free, 20-ball,
1.8 mm × 2.2 mm wafer-level chip scale package (WLCSP).
FUNCTIONAL BLOCK DIAGRAM
5V 1.8V
SCL
SDA
BCLK
FSYNC
SDATA
VREG50/AVDD VREG18/DVDD
I2C
AGND
REG_EN
ADDR
BST+
TDM
I2S
INPUT
VOLUME
DAC
Σ-
CLASS-D
MODULATOR
FULL
BRIDGE
POWER
STAGE
OUT+
OUT–
SSM3515
BST–
PVDD PGND
Figure 1.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2015–2017 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com



Analog Devices SSM3515
SSM3515* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
EVALUATION KITS
SSM3515 Evaluation Board
DOCUMENTATION
Data Sheet
SSM3515: 31 W, Filterless, Class-D Digital Input Audio
Amplifier Data Sheet
TOOLS AND SIMULATIONS
SSM3515 IBIS Model
DESIGN RESOURCES
SSM3515 Material Declaration
PCN-PDN Information
Quality And Reliability
Symbols and Footprints
DISCUSSIONS
View all SSM3515 EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.



Analog Devices SSM3515
SSM3515
TABLE OF CONTENTS
Features .............................................................................................. 1 
Applications....................................................................................... 1 
General Description ......................................................................... 1 
Functional Block Diagram .............................................................. 1 
Revision History ............................................................................... 2 
Specifications..................................................................................... 3 
Digital Timing Characteristics ................................................... 6 
Absolute Maximum Ratings............................................................ 8 
Thermal Resistance ...................................................................... 8 
ESD Caution.................................................................................. 8 
Pin Configuration and Function Descriptions............................. 9 
Typical Performance Characteristics ........................................... 10 
Theory of Operation ...................................................................... 19 
Overview...................................................................................... 19 
Power Supplies ............................................................................ 19 
Power-Up Sequence ................................................................... 19 
Power-Down Operation ............................................................ 19 
REG_EN Pin Setup and Control .............................................. 19 
ADDR Pin Setup and Control .................................................. 20 
Clocking....................................................................................... 20 
Digital Audio Serial Interface ....................................................... 21 
Stereo (I2S/Left Justified) Operating Mode............................. 21 
TDM Operating Mode............................................................... 21 
I2C Control .................................................................................. 21 
Analog and Digital Gain............................................................ 24 
Pop and Click Suppression........................................................ 24 
REVISION HISTORY
1/2017—Rev. 0 to Rev. A
Changes to Figure 2 and Table 5..................................................... 6
6/2015—Revision 0: Initial Version
Data Sheet
EMI Noise.................................................................................... 24 
Output Modulation Description .............................................. 24 
Faults and Limiter Status Reporting ........................................ 25 
VBAT Sensing............................................................................. 25 
Limiter and Battery Tracking Threshold Control.................. 25 
Layout .......................................................................................... 28 
Bootstrap Capacitors.................................................................. 28 
Power Supply Decoupling ......................................................... 28 
Register Summary .......................................................................... 29 
Register Details ............................................................................... 30 
Power Control Register ............................................................. 30 
Gain and Edge Control Register............................................... 30 
DAC Control Register................................................................ 31 
DAC Volume Control Register................................................. 32 
SAI Control 1 Register............................................................... 33 
SAI Control 2 Register............................................................... 34 
Battery Voltage Output Register............................................... 35 
Limiter Control 1 Register ........................................................ 35 
Limiter Control 2 Register ........................................................ 36 
Limiter Control 3 Register ........................................................ 37 
Status Register............................................................................. 37 
Fault Control Register................................................................ 38 
Typical Application Circuit ........................................................... 40 
Outline Dimensions ....................................................................... 41 
Ordering Guide .......................................................................... 41 
Rev. A| Page 2 of 41







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)