Signal Conditioner. ZSSC3015 Datasheet

ZSSC3015 Conditioner. Datasheet pdf. Equivalent

ZSSC3015 Datasheet
Recommendation ZSSC3015 Datasheet
Part ZSSC3015
Description Sensor Signal Conditioner
Feature ZSSC3015; Data Sheet Rev. 1.02 / March 2013 ZSSC3015 RBicdLite-Auto™ Sensor Signal Conditioner with Diagnostic.
Manufacture Zentrum Mikroelektronik Dresden
Datasheet
Download ZSSC3015 Datasheet




Zentrum Mikroelektronik Dresden ZSSC3015
Data Sheet
Rev. 1.02 / March 2013
ZSSC3015
RBicdLite-Auto™ Sensor Signal Conditioner with Diagnostics
Multi-Market Sensing Platforms



Zentrum Mikroelektronik Dresden ZSSC3015
ZSSC3015
RBicdLite-Auto™ Sensor Signal Conditioner with Diagnostics
Brief Description
The ZSSC3015 RBicdLite-Autosensor signal condi-
tioner IC is adjustable to nearly all piezo-resistive
bridge sensors. Measured and corrected bridge
values are provided at the Sig™ pin, which can be
configured as an analog voltage output or as a one-
wire serial digital output.
The ZACwire™ digital one-wire interface (OWI) can
be used for a simple PC-controlled calibration
procedure to program a set of calibration coefficients
into an on-chip EEPROM. The calibrated ZSSC3015
and a specific sensor are mated digitally: fast,
precise, and without the cost overhead associated
with trimming by external devices or laser. Integrated
diagnostics functions make the ZSSC3015
particularly well-suited for automotive applications.
Features
Digital compensation of sensor offset, sensitivity,
temperature drift, and nonlinearity
Programmable analog gain and digital gain;
accommodates bridges with spans < 1mV/V
and high offset
Many diagnostic features on chip (e.g., EEPROM
signature, bridge connection checks, bridge short
detection, power loss detection)
Independently programmable high and low
clipping levels
24-bit customer ID field for module traceability
Internal temperature compensation reference (no
external components)
Option for external temperature compensation
with addition of single diode
Output options: rail-to-rail ratiometric analog
voltage (12-bit resolution), absolute analog
voltage, ZACwire™ digital one-wire interface
Fast power-up to data out response; output
available 5ms after power-up
Current consumption depends on programmed
sample rate and mode: 1mA down to 300µA (typ.)
Fast response time: 1.4ms typical
High voltage protection: 30V with external JFET
AEC-Q100 qualified
Benefits
No external trimming components required
PC-controlled configuration and calibration via
ZACwire™ one-wire interface simple, low cost
High accuracy (as high as ±0.1% FSO @ -25 to
85°C; ±0.25% FSO @ -50 to 150°C)
Single-pass calibration quick and precise
Available Support
Evaluation Kit available
Mass Calibration System available
Support for industrial mass calibration available
Quick circuit customization possible for large
production volumes
Physical Characteristics
Wide operation temperature: 50°C to +150°C
Supply voltage 2.7 to 5.5V; with external JFET,
5.5 to 30V
Small SOP8 package
ZSSC3015 Application Circuit
VDD
Sig
ZSSC3015
VBP
VBN
Vgate
VSS
Vsupply
+2.7 to +5.5 V
OUT/OWI
0.1 F
Ground
For more information, contact ZMDI via SSC@zmdi.com.
© 2013 Zentrum Mikroelektronik Dresden AG Rev. 1.02 March 25, 2013 All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated,
stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.



Zentrum Mikroelektronik Dresden ZSSC3015
ZSSC3015
RBicdLite-Auto™ Sensor Signal Conditioner with Diagnostics
ZSSC3015 Block Diagram
Highly Versatile Applications
in Many Markets Including
Industrial
Building Automation
Office Automation
White Goods
Automotive
Portable Devices
Your Innovative Designs
Optional
Ext. Diode
for Temp
0.1 F
JFET1
(Optional if supply is 2.7 to 5.5 V)
SD
VDD (2.7 to 5.5 V)
Vgate
5.5 V to 30 V
VSUPPLY
Sensor
Diagnostics
PTAT
Temperature
Reference
Voltage
Reference
RBicdLite-Auto
ZSSC3015
12-Bit
DAC
VBP
VBN
ExtTemp
(Optional) Bsink
INMUX
Power Save
POR/Oscillator
PREAMP
A
D
14-Bit ADC
_
+
OUTBUF1
EEPROM
with Charge
Pump
Digital
Core
ZACwireTM
Interface
Power Lost
Diagnostic
SigTM
0 V to 1 V
Ratiometric
Rail-to-Rail
OWI/ZACwireTM
Analog Block
Digital Block
VSS
Rail-to-Rail Ratiometric Voltage Output Applications
Optional Bsink
1 Bsink
2 VBP
VSS 8
SigTM 7
3 ExtTemp
VDD 6
4 VBN
Vgate 5
ZSSC3015
Vsupply
+2.7 to +5.5 V
OUT
0.1 F
Ground
Absolute Analog Voltage Output Applications
1 Bsink
2 VBP
VSS 8
SigTM 7
BSS169
SD
Vsupply
+5.5 to +30 V
OUT
3 ExtTemp
VDD 6
Optional Bsink
4 VBN
Vgate 5
ZSSC3015
0.1 F
Ground
Part Ordering Examples (See section 11 in the data sheet for additional options.)
Sales Code
Description
ZSSC3015NE1B ZSSC3015 RBicdLite-Auto™ Die — Temperature range: -50°C to +150°C
ZSSC3015NE1C
ZSSC3015NE1D
ZSSC3015 RBicdLite-AutoDie Temperature range: -50°C to +150°C
ZSSC3015 RBicdLite-AutoDie Temperature range: -50°C to +150°C
ZSSC3015NE2T(R) ZSSC3015 RBicdLite-AutoSOP8 (150 mil) Temperature range: -50°C to +150°C
ZSSC3015KIT
ZSSC3015 SSC Evaluation Kit: Communication Board, SSC Board, Sensor
Replacement Board, Evaluation Software, USB Cable, 5 IC Samples
Package
Unsawn on Wafer
Sawn on Wafer Frame
Waffle Pack
Tube: add “-T” to sales code. Reel: add “-R”
Kit
Sales and Further Information
www.zmdi.com
SSC@zmdi.com
Zentrum Mikroelektronik
Dresden AG
Global Headquarters
Grenzstrasse 28
01109 Dresden, Germany
Central Office:
Phone +49.351.8822.0
Fax +49.351.8822.600
European Technical Support
Phone +49.351.8822.7.772
Fax +49.351.8822.87.772
European Sales (Stuttgart)
Phone +49.711.674517.55
Fax +49.711.674517.87955
ZMD America, Inc.
1525 McCarthy Blvd., #212
Milpitas, CA 95035-7453
USA
USA Phone +855.275.9634
Phone +408.883.6310
Fax +408.883.6358
Zentrum Mikroelektronik
ZMD FAR EAST, Ltd.
Dresden AG, Japan Office
3F, No. 51, Sec. 2,
2nd Floor, Shinbashi Tokyu Bldg. Keelung Road
4-21-3, Shinbashi, Minato-ku
11052 Taipei
Tokyo, 105-0004
Taiwan
Japan
Phone +81.3.6895.7410
Fax +81.3.6895.7301
Phone +886.2.2377.8189
Fax +886.2.2377.8199
Zentrum Mikroelektronik
Dresden AG, Korea Office
U-space 1 Building
11th Floor, Unit JA-1102
670 Sampyeong-dong
Bundang-gu, Seongnam-si
Gyeonggi-do, 463-400
Korea
Phone +82.31.950.7679
Fax +82.504.841.3026
DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.
Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The
information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer,
licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or
in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any
customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for
any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty,
tort (including negligence), strict liability, or otherwise.
© 2013 Zentrum Mikroelektronik Dresden AG Rev. 1.02March 25, 2013
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)