Signal Conditioner. ZSSC3016 Datasheet

ZSSC3016 Conditioner. Datasheet pdf. Equivalent

ZSSC3016 Datasheet
Recommendation ZSSC3016 Datasheet
Part ZSSC3016
Description High Resolution 16-Bit Sensor Signal Conditioner
Feature ZSSC3016; Data Sheet Rev. 1.00 / December 2011 ZSSC3016 Low Power, High Resolution 16-Bit Sensor Signal Condit.
Manufacture Zentrum Mikroelektronik Dresden
Datasheet
Download ZSSC3016 Datasheet




Zentrum Mikroelektronik Dresden ZSSC3016
Data Sheet
Rev. 1.00 / December 2011
ZSSC3016
Low Power, High Resolution 16-Bit Sensor Signal Conditioner



Zentrum Mikroelektronik Dresden ZSSC3016
ZSSC3016
Low Power 16 Bit Sensor Signal Conditioner IC
Brief Description
The ZSSC3016 is a sensor signal conditioner
(SSC) integrated circuit for high-accuracy ampli-
fication and analog-to-digital conversion of a differ-
ential input signal. Designed for high resolution
altimeter module applications, the ZSSC3016 can
perform offset, span, and 1st and 2nd order
temperature compensation of the measured signal.
Developed for correction of resistive bridge
sensors, it can also provide a corrected
temperature output measured with an internal
sensor.
The measured and corrected bridge values are
provided at the digital output pins, which can be
configured as I2C* (≤ 3.4MHz) or SPI (≤ 20MHz).
Digital compensation of signal offset, sensitivity,
temperature, and non-linearity is accomplished via
an 18-bit internal digital signal processor (DSP)
running a correction algorithm. Calibration coeffici-
ents are stored on-chip in a highly reliable, non-
volatile, multiple-time programmable (MTP) mem-
ory. Programming the ZSSC3016 is simple via the
serial interface and the PC-controlled calibration
software provided in the ZMDI Development Kit.
The interface is used for the PC-controlled cali-
bration procedure, which programs the set of cali-
bration coefficients in memory. The digital mating
is fast and precise, eliminating the overhead
normally associated with trimming external com-
ponents and multi-pass calibration routines.
Features
Flexible, programmable analog front-end
design; up to 16-bit scalable, charge-balancing
two-segment analog-to-digital converter (ADC)
Fully programmable gain amplifier accepting
sensors from 14 to 72 (linear factor)
Internal auto-compensated temperature sensor
Digital compensation of individual sensor offset;
1st and 2nd order digital compensation of sensor
gain
Digital compensation of 1st and 2nd order tem-
perature gain and offset drift
Intelligent power management unit
Layout customized for die-die bonding with
sensor for high-density chip-on-board assembly
Typical sensor elements can achieve accuracy
of less than ±0.10% FSO @ -40 to 85 °C
* I2C is a registered trademark of NXP.
Benefits
Integrated 18-bit calibration math DSP
Fully corrected signal at digital output
Minimize calibration costs through the one-pass
calibration concept
No external trimming components required
Highly integrated CMOS design
Excellent for low-voltage and low-power battery
applications
Physical Characteristics
Supply voltage range: 1.8 to 3.6V
Current consumption: 1mA (operating mode)
Sleep State current <250nA (25°C)
Temperature resolution: <0.003K/LSB
Operation temperature: –40°C to +85 °C
Small die size: 1.5mm²
Delivery options: die for wafer bonding
Typical Applications
The ZSSC3016 is designed for operation in
calibrated resistive (pressure) sensor modules:
Barometric altitude measurement for portable
navigation
Altitude measurement for emergency call
systems
Altitude measurement for car navigation
Inside hard disk pressure measurement
Weather forecast
Fan control
ZSSC3016 Application Example.
© 2011 ZMD AG — Rev. 1.00
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.
The information furnished in this publication is PRELIMINARY and subject to changes without notice.



Zentrum Mikroelektronik Dresden ZSSC3016
ZSSC3016
Low Power 16 Bit Sensor Signal Conditioner IC
ZSSC3016 Block Diagram
Ordering Information
Ordering Examples *
Description
ZSSC3016CC1B
Temperature range: –40°C to +85 °C,
Consumer-Level: Parameter according Data Sheet
ZSSC3016CI1B
Temperature range: –40°C to +85 °C,
Industrial-Level: 10 years MTP-Data Retention; 20FIT
ZSSC3016CI1D ES
Engineering Samples, Temperature range: –40°C to +85 °C
ZSSC3016KIT
ZSSC3016 Evaluation Kit, including sample, modular evaluation
board, and evaluation software.
* Please contact ZMDI Sales for additional options.
Package
Wafer (304um) unsawn
Wafer (304um) unsawn
Dice in Waffle Pack
Kit
Sales and Further Information
www.zmdi.com
sales@zmdi.com
Zentrum Mikroelektronik
Dresden AG
Grenzstrasse 28
01109 Dresden
Germany
ZMD America, Inc.
8413 Excelsior Drive
Suite 200
Madison, WI 53717
USA
Phone +49 (0)351.8822.7.772 Phone +1 (608) 829-1987
Fax +49 (0)351.8822.87.772 Fax +1 (631) 549-2882
Zentrum Mikroelektronik
Dresden AG, Japan Office
2nd Floor, Shinbashi Tokyu Bldg.
4-21-3, Shinbashi, Minato-ku
Tokyo, 105-0004
Japan
Phone +81.3.6895.7410
Fax +81.3.6895.7301
ZMD FAR EAST, Ltd.
3F, No. 51, Sec. 2,
Keelung Road
11052 Taipei
Taiwan
Phone +886.2.2377.8189
Fax +886.2.2377.8199
DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are PRELIMINARY and subject to change without notice. Zentrum
Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The information furnished hereby is believed to be true
and accurate. However, under no circumstances shall ZMD AG be liable to any customer, licensee, or any other third party for any special, indirect, incidental, or consequential damages of
any kind or nature whatsoever arising out of or in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG
to any customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for any damages in connection with or
arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty, tort (including negligence), strict liability, or otherwise
© 2011 ZMD AG — Rev. 1.00
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)