Signal Conditioner. ZSSC3036 Datasheet

ZSSC3036 Conditioner. Datasheet pdf. Equivalent

ZSSC3036 Datasheet
Recommendation ZSSC3036 Datasheet
Part ZSSC3036
Description High Resolution 16-Bit Sensor Signal Conditioner
Feature ZSSC3036; Data Sheet Rev. 1.20 / May 2013 ZSSC3036 Low-Power, High-Resolution 16-Bit Sensor Signal Conditioner.
Manufacture Zentrum Mikroelektronik Dresden
Datasheet
Download ZSSC3036 Datasheet




Zentrum Mikroelektronik Dresden ZSSC3036
Data Sheet
Rev. 1.20 / May 2013
ZSSC3036
Low-Power, High-Resolution 16-Bit Sensor Signal Conditioner
Mobile Sensing ICs
Smart and Mobile



Zentrum Mikroelektronik Dresden ZSSC3036
ZSSC3036
Low-Power 16-Bit Sensor Signal Conditioner IC
Brief Description
The ZSSC3036 is a sensor signal conditioner (SSC)
integrated circuit for high-accuracy amplification and
analog-to-digital conversion of a differential input
signal. Designed for high-resolution altimeter module
applications, the ZSSC3036 can perform offset,
span, and 1st and 2nd order temperature compen-
sation of the measured signal. Developed for correc-
tion of resistive bridge sensors, it can also provide a
corrected temperature output measured with an
internal sensor.
The measured and corrected bridge values are
provided at the digital output pins, which can be
configured as I2C* (3.4MHz) or SPI (20MHz).
Digital compensation of signal offset, sensitivity,
temperature, and non-linearity is accomplished via
an 18-bit internal digital signal processor (DSP) run-
ning a correction algorithm. Calibration coefficients
are stored on-chip in a highly reliable, non-volatile,
multiple-time programmable (MTP) memory. Pro-
gramming the ZSSC3036 is simple via the serial
interface. The IC-internal charge pump provides the
MTP programming voltage. The interface is used for
the PC-controlled calibration procedure, which pro-
grams the set of calibration coefficients in memory.
The ZSSC3036 provides accelerated signal process-
ing in order to support high-speed control, safety,
and real-time sensing applications. It complements
ZMDI’s additional ZSSC30x6 products.
Features
Flexible, programmable analog front-end design;
up to 16-bit scalable, charge-balancing two-
segment analog-to-digital converter (ADC)
Fully programmable gain amplifier accepting
sensors from 14 to 72 (linear factor)
Internal auto-compensated temperature sensor
Digital compensation of individual sensor offset;
1st and 2nd order digital compensation of sensor
gain as well as of 1st and 2nd order temperature
gain and offset drift
Fast sensing: 16-bit conditioned sensor signal
measurement rate at more than 200s-1
Typical sensor elements can achieve accuracy of
less than ±0.10% FSO** @ -40 to 110°C
Benefits
Integrated 18-bit calibration math DSP
Fully corrected signal at digital output
Layout customized for die-die bonding with
sensor for high-density chip-on-board assembly
One-pass calibration minimizes calibration costs
No external trimming, filter, or buffering com-
ponents required
Highly integrated CMOS design
Excellent for low-voltage and low-power battery
applications
Optimized for operation in calibrated resistive
sensor modules
Physical Characteristics
Supply voltage range: 1.8 to 3.6V
Current consumption: 1mA (operating mode)
Sleep State current: 50nA (typical)
Temperature resolution: <0.003K/LSB
Operation temperatures: 40°C to +85°C
40°C to +110°C
Small die size: 1.5mm²
Delivery options: die for wafer bonding
* I2C™ is a trademark of NXP.
** FSO = Full Scale Output.
ZSSC3036 Application Example
For more information, contact ZMDI via mobile.sensing@zmdi.com.
© 2013 Zentrum Mikroelektronik Dresden AG Rev. 1.20 May 28, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated,
stored, or used without the prior written consent of the copyright owner. The information furnished in this publication is subject to changes without notice.



Zentrum Mikroelektronik Dresden ZSSC3036
ZSSC3036
Low-Power 16-Bit Sensor Signal Conditioner IC
ZSSC3036
Block Diagram
VDDB
VTP Temperature
Reference
VTN Sensor
AGND / CM
Generator
Vreg int
Bias Current
Generator
Voltage
Regulator
Power Ctr.
ZSSC3036
VDD
VSS
Sensor
Bridge
INP
INN
Pre-
Amplifier
A
D
16 Bit
18-bit DSP Core
(Calculations,
Communication)
EOC
Applications
VSSB
Power-ON
Reset
Clock
Generator Ring
Oscillator
System
Control
Unit
MTP
ROM
SPI
I²CTM
SCLK/SCL
SS
MOSI/SDA
MISO
SEL
Barometric altitude measurement for
portable navigation or emergency call
systems
Altitude measurement for car navigation
Inside hard disk pressure measurement
Weather forecast
Fan control
Industrial, pneumatic, and liquid pressure
High-resolution temperature
measurements
Ordering Information (See section 6 in the data sheet for additional options for delivery package and wafer thickness of 725µm.)
Sales Code
Description
ZSSC3036CC1B Dietemperature range: 40°C to +85 °C
ZSSC3036CI1B Dietemperature range: 40°C to +85 °C, extended qualification
ZSSC3036CC1C Dietemperature range: 40°C to +85°C
ZSSC3036CI1BH Dietemperature range: 40°C to +110 °C, extended qualification
ZSSC3036CI1CH Dietemperature range: 40°C to +110 °C, extended qualification
Delivery Package
Wafer (304µm) unsawn, tested
Wafer (304µm) unsawn, tested
Dice on frame (304µm), tested
Wafer (304µm) unsawn, tested
Dice on frame (304µm), tested
ZSSC30x6-KIT Evaluation Kit for ZSSC30x6 Product Family, including boards, cable, software, and 1 sample
Sales and Further Information
www.zmdi.com
mobile.sensing@zmdi.com
Zentrum Mikroelektronik
Dresden AG
Global Headquarters
Grenzstrasse 28
01109 Dresden, Germany
Central Office:
Phone +49.351.8822.0
Fax +49.351.8822.600
European Technical Support
Phone +49.351.8822.7.772
Fax +49.351.8822.87.772
European Sales (Stuttgart)
Phone +49.711.674517.55
Fax +49.711.674517.87955
ZMD America, Inc.
1525 McCarthy Blvd., #212
Milpitas, CA 95035-7453
USA
USA Phone +855.275.9634
Phone +408.883.6310
Fax +408.883.6358
Zentrum Mikroelektronik
ZMD FAR EAST, Ltd.
Dresden AG, Japan Office
3F, No. 51, Sec. 2,
2nd Floor, Shinbashi Tokyu Bldg. Keelung Road
4-21-3, Shinbashi, Minato-ku
11052 Taipei
Tokyo, 105-0004
Taiwan
Japan
Phone +81.3.6895.7410
Fax +81.3.6895.7301
Phone +886.2.2377.8189
Fax +886.2.2377.8199
Zentrum Mikroelektronik
Dresden AG, Korea Office
U-space 1 Building
11th Floor, Unit JA-1102
670 Sampyeong-dong
Bundang-gu, Seongnam-si
Gyeonggi-do, 463-400
Korea
Phone +82.31.950.7679
Fax +82.504.841.3026
DISCLAIMER: This information applies to a product under development. Its characteristics and specifications are subject to change without notice.
Zentrum Mikroelektronik Dresden AG (ZMD AG) assumes no obligation regarding future manufacture unless otherwise agreed to in writing. The
information furnished hereby is believed to be true and accurate. However, under no circumstances shall ZMD AG be liable to any customer,
licensee, or any other third party for any special, indirect, incidental, or consequential damages of any kind or nature whatsoever arising out of or
in any way related to the furnishing, performance, or use of this technical data. ZMD AG hereby expressly disclaims any liability of ZMD AG to any
customer, licensee or any other third party, and any such customer, licensee and any other third party hereby waives any liability of ZMD AG for
any damages in connection with or arising out of the furnishing, performance or use of this technical data, whether based on contract, warranty,
tort (including negligence), strict liability, or otherwise.
© 2013 Zentrum Mikroelektronik Dresden AG Rev. 1.20May 28, 2013. All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated,
stored, or used without the prior written consent of the copyright owner.





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)