40V 1A GATE DRIVER
Description
ZXGD3009DY is a high-speed, non-inverting single gate driver for switching MOSFETs. It can transfer up to 1A...
Description
Description
ZXGD3009DY is a high-speed, non-inverting single gate driver for switching MOSFETs. It can transfer up to 1A peak source/sink current into the gate for effective charging and discharging of the capacitive load.
This gate driver ensures rapid switching of the MOSFET to minimize power losses and distortion in high current switching applications. It can typically drive 500mA into the low gate impedance with just 10mA input from a controller. The turn-on and turn-off switching behavior of the MOSFET can be individually tailored to suit an application. In particular, by defining the switching characteristics appropriately, EMI and cross conduction problems can be reduced.
Applications
Power MOSFET Gate Driving in: Power Supplies DC-DC Converters Amplifier Output Stages
ZXGD3009DY
40V 1A GATE DRIVER IN SOT363
Features
High-Gain Buffer with Typically 500mA Output from 10mA Input Emitter-Follower that is Rugged to Latch-Up/Shoot-Through
Issues Wide Supply Voltage to Minimize On-Losses Separate Source and Sink Outputs for Independent Control of
MOSFET Turn-On and Turn-Off Times Optimized Pin-Out to Simplify PCB Layout and Reduce
Parasitic Trace Inductances Near-Zero Quiescent Supply Current Qualified to AEC-Q101 Standards for High Reliability Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3)
Mechanical Data
Case: SOT363 Case material: Molded Plastic, ―Green‖ Molding Compound.
UL Flammabili...
Similar Datasheet