www.vishay.com
VOR1142M4
Vishay Semiconductors
1 Form A Solid-State Relay
A1
4 S1
C2
3 S2
LINKS TO ADDITIONAL RESOURCES
Product Page
Design Tools
3D 3D
3D Models
Models
DESCRIPTION
The VOR1142 is an SPST normally open switch (1 form A) that can replace electromechanical relays in many applications. It is constructed using a GaAlAs IRED actuation control and MOSFETs for the switch output.
FEATURES • Isolation test voltage 3750 VRMS • Typical RON 19 • Load voltage 400 V • Load current 140 mA • High surge capability • Clean bounce free switching • Low power consumption • High temperature range • Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS • General telecom switching • Metering • Security equipment • Instrumentation • Industrial controls • Battery management systems • Automatic measurement equipment
AGENCY APPROVALS • UL • cUL • DIN EN 60747-5-5 (VDE 0884-5), available with option 1
ORDERING INFORMATION
V
O
R
1
1
4
2
M
4
#
SOP-4
PART NUMBER
PACKAGE CONFIGURATION
7.21 mm
PACKAGE SOP-4, tape and reel SOP-4, tube
UL, cUL, VDE VOR1142M4T VOR1142M4
Rev. 1.2, 29-Aug-2023
1
Document Number: 84301
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
VOR1142M4
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
CONDITIONS
SYMBOL
VALUE
UNIT
INPUT
IRED continuous forward current IRED reverse voltage Input power dissipation Junction temperature OUTPUT
IF
50
mA
VR
5
V
Pdiss
80
mW
Tj
125
°C
DC or peak AC load voltage Continuous DC load current SSR output power dissipation Junction temperature SSR Ambient temperature range (1) Storage temperature range Soldering temperature
t = 10 s max.
VL
400
V
IL
140
mA
Pdiss
550
mW
Tj
125
°C
Tamb
-40 to +100
°C
Tstg
-40 to +150
°C
Tsld
260
°C
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability.
(1) For continuous negative potential from output side to input side only 85 °C is allowed
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL MIN.
TYP.
MAX.
UNIT
INPUT
IRED forward current, switch turn-on IRED forward current, switch turn-off IRED forward voltage IRED reverse current OUTPUT
IL = 100 mA, t = 10 ms VL = ± 350 V, IL < 1 μA
IF = 10 mA VR = 5 V
IFon
-
0.25
2
mA
IFoff
0.05
0.15
-
mA
VF
-
1.4
1.6
V
IR
-
-
10
μA
On-resistance Off-resistance Off-state leakage current
Output capacitance COUPLER
IF = 5 mA, IL = 50 mA IF = 0 mA, VL = ± 100 V IF = 0 mA, VL = ± 100 V IF = 0 mA, VL = ± 400 V IF = 0 mA, VL = 1 V, 1 MHz IF = 0 mA, VL = 50 V, 1 MHz
RON
-
19
27
ROFF
0.5
850
-
G
Ileak
-
<1
100
nA
Ileak
-
6
500
nA
CO
-
39
-
pF
CO
-
6
-
pF
Capacitance (input to output)
VIO = 1 V
CIO
-
0.4
-
pF
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements.
Rev. 1.2, 29-Aug-2023
2
Document Number: 84301
For technical questions, contact:
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
VOR1142M4
Vishay Semiconductors
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL MIN.
Turn-on time Turn-off time
IF = 5 mA, IL = 50 mA IF = 5 mA, IL = 50 mA
ton
-
toff
-
TYP. 0.1 0.05
MAX. 0.5 0.2
UNIT ms ms
Input
Output ton
90 % 10 % toff Fig. 1 - Timing Schematic
A1 C2
4
VL
3
Output
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
Climatic classification
According to IEC 68 part 1
Pollution degree
According to DIN VDE 0109
Comparative tracking index
Maximum rated withstanding isolation voltage
According to UL1577, t = 1 min
Maximum transient isolation voltage
According to DIN EN 60747-5-5
Maximum repetitive peak isolation voltage
According to DIN EN 60747-5-5
Isolation resistance Output safety power
Tamb = 25 °C, VIO = 500 V Tamb = 100 °C, VIO = 500 V
Input safety current
Input safety temperature
Clearance distance
SOP-4
Creepage distance
SOP-4
Insulation thickness
Input to output test voltage, method B I.