Document
www.vishay.com
TSOP361.., TSOP363.., TSOP365..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
4 3 2 1
16797
DESIGN SUPPORT TOOLS click logo to get started
Models
Available
MECHANICAL DATA Pinning: 1 = GND, 2 = N.C., 3 = VS, 4 = OUT
ORDERING CODE Taping: TSOP36...TT - top view taped TSOP36...TR - side view taped
FEATURES
• Very low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Continuous data transmission possible
• Supply voltage: 2.5 V to 5.5 V
• Insensitive to supply voltage ripple and noise
• Taping available for topview and sideview assembly
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
DESCRIPTION
The TSOP361.., TSOP363.., and TSOP365.. series are miniaturized SMD IR receiver modules for infrared remote control systems. PIN diode and preamplifier are assembled on a lead frame, the epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding.
The TSOP363.. series devices are optimized to suppress almost all spurious pulses from energy saving lamps like CFLs. AGC3 may also suppress some data signals if continuously transmitted.
The TSOP361.. series are provided primarily for compatibility with old AGC1 designs. New designs should prefer the TSOP363.. series containing the newer AGC3. The TSOP365.. series contain a very robust AGC5. This series should only be used for critically noisy environments.
These components have not been qualified according to automotive specifications.
PARTS TABLE
AGC
30 kHz
33 kHz
Carrier
36 kHz
frequency 38 kHz
40 kHz
56 kHz
Package
Pinning
Dimensions (mm)
Mounting
Application
Best choice for
LEGACY, FOR SHORT BURST REMOTE CONTROLS (AGC1)
NOISY ENVIRONMENTS AND SHORT BURSTS (AGC3)
VERY NOISY ENVIRONMENTS AND SHORT BURSTS (AGC5)
TSOP36130
TSOP36330
TSOP36530
TSOP36133
TSOP36333
TSOP36533
TSOP36136
TSOP36336 (1)
TSOP36536
TSOP36138
TSOP36338 (2)(3)(4)(5)
TSOP36538
TSOP36140
TSOP36340
TSOP36540
TSOP36156
TSOP36356
TSOP36556
Panhead
1 = GND, 2 = N.C., 3 = VS, 4 = OUT 7.5 W x 5.3 H x 4.0 D
SMD
Remote control
(1) MCIR (2) Mitsubishi (3) RECS-80 Code (4) r-map (5) XMP-1, XMP-2
Rev. 1.6, 24-Sep-2018
1 Document Number: 82567
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com BLOCK DIAGRAM
30 kΩ
Input
AGC
Band pass
Demo -
dulator
PIN
16839
Control circuit
TSOP361.., TSOP363.., TSOP365..
Vishay Semiconductors
3 VS
4 OUT
1; 2 GND
APPLICATION CIRCUIT
17170-11
Transmitter with
TSALxxxx
IR receiver
Circuit
VS
OUT GND
R1
C1 VO
+ VS μC
GND
R1 and C1 recommended to reduce supply ripple for VS < 2.8 V
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Supply voltage (pin 3) Supply current (pin 3) Output voltage (pin 4) Ou.