DatasheetsPDF.com

STM32L496AG Dataheets PDF



Part Number STM32L496AG
Manufacturers STMicroelectronics
Logo STMicroelectronics
Description 32-bit MCU+FPU
Datasheet STM32L496AG DatasheetSTM32L496AG Datasheet (PDF)

STM32L496xx Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100 DMIPS, up to 1 MB flash, 320 KB SRAM, USB OTG FS, audio, external SMPS Datasheet - production data Features Includes ST state-of-the-art patented technology • Ultra-low-power with FlexPowerControl – 1.71 V to 3.6 V power supply – -40 °C to 85/125 °C temperature range – 320 nA in VBAT mode: supply for RTC and 32x32-bit backup registers – 25 nA Shutdown mode (5 wakeup pins) – 108 nA Standby mode (5 wakeup pins) – 426 nA Standby mode.

  STM32L496AG   STM32L496AG



Document
STM32L496xx Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100 DMIPS, up to 1 MB flash, 320 KB SRAM, USB OTG FS, audio, external SMPS Datasheet - production data Features Includes ST state-of-the-art patented technology • Ultra-low-power with FlexPowerControl – 1.71 V to 3.6 V power supply – -40 °C to 85/125 °C temperature range – 320 nA in VBAT mode: supply for RTC and 32x32-bit backup registers – 25 nA Shutdown mode (5 wakeup pins) – 108 nA Standby mode (5 wakeup pins) – 426 nA Standby mode with RTC – 2.57 µA Stop 2 mode, 2.86 µA Stop 2 with RTC – 91 µA/MHz run mode (LDO mode) – 37 μA/MHz run mode (at 3.3 V SMPS mode) – Batch acquisition mode (BAM) – 5 µs wakeup from Stop mode – Brown out reset (BOR) in all modes except shutdown – Interconnect matrix • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait-state execution from flash memory, frequency up to 80 MHz, MPU, 100 DMIPS and DSP instructions • Performance benchmark – 1.25 DMIPS/MHz (Drystone 2.1) – 273.55 Coremark® (3.42 Coremark/MHz at 80 MHz) • Energy benchmark – 279 ULPMark™ CP score – 80.2 ULPMark™ PP score • 16 timers: 2x 16-bit advanced motor-control, 2x 32-bit and 5x 16-bit general purpose, 2x 16-bit basic, 2x low-power 16-bit timers (available in Stop mode), 2x watchdogs, SysTick timer LQFP64 (10 x 10) LQFP100 (14 x 14) LQFP144 (20 × 20) WLCSP100L WLCSP115 (4.63 x 4.15 mm) UFBGA169 (7 x 7) UFBGA132 (7 × 7) • RTC with HW calendar, alarms and calibration • Up to 136 fast I/Os, most 5 V-tolerant, up to 14 I/Os with independent supply down to 1.08 V • Dedicated Chrom-ART Accelerator for enhanced graphic content creation (DMA2D) • 8- to 14-bit camera interface up to 32 MHz (black & white) or 10 MHz (color) • Memories – Up to 1 MB flash, 2 banks read-while-write, proprietary code readout protection – 320 KB of SRAM including 64 KB with hardware parity check – External memory interface for static memories supporting SRAM, PSRAM, NOR and NAND memories – Dual-flash Quad SPI memory interface • Clock sources – 4 to 48 MHz crystal oscillator – 32 kHz crystal oscillator for RTC (LSE) – Internal 16 MHz factory-trimmed RC (±1%) – Internal low-power 32 kHz RC (±5%) – Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than ±0.25% accuracy) – Internal 48 MHz with clock recovery – 3 PLLs for system clock, USB, audio, ADC • LCD 8× 40 or 4× 44 with step-up converter • Up to 24 capacitive sensing channels: support touchkey, linear and rotary touch sensors November 2022 This is information on a product in full production. DS11585 Rev 17 1/285 www.st.com STM32L496xx • 4x digital filters for sigma delta modulator • Rich analog peripherals (independent supply) – 3× 12-bit ADCs 5 Msps, up to 16-bit with hardware oversampling, 200 µA/Msps – 5x U(S)ARTs (ISO 7816, LIN, IrDA, modem) – 1x LPUART – 3x SPIs (4x SPIs with the Quad SPI) – 2x 12-bit DAC output channels, low-power – 2x CANs (2.0B Active) and SDMMC sam.


G3VM-2FL STM32L496AG STM32L496QG


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)