Intelligent Power Module
STK554U362C-E
Intelligent Power Module (IPM) 600 V, 10 A
Overview This “Inverter IPM” is highly integrated device conta...
Description
STK554U362C-E
Intelligent Power Module (IPM) 600 V, 10 A
Overview This “Inverter IPM” is highly integrated device containing all High Voltage (HV) control from HV-DC to 3-phase outputs in a single small SIP module. Output stage uses IGBT / FRD technology and implements Under Voltage Protection (UVP) and Over Current Protection (OCP) with a Fault Detection output flag. Internal Boost diodes are provided for high side gate boost drive.
Function Single control power supply due to Internal bootstrap circuit for high side pre-driver circuit All control inputs and status outputs are at low voltage levels directly compatible with microcontrollers. A single power supply drive is enabled through the use of bootstrap circuits for upper power supplies Built-in dead-time for shoot-thru protection Having open emitter output for low side IGBTs ; individual shunt resistor per phase for OCP Externally accessible embedded thermistor for substrate temperature measurement Shutdown function ‘ITRIP’ to disable all operations of the 6 phase output stage by external input
www.onsemi.com
ORDERING INFORMATION
See detailed ordering and shipping information on page 15 of this data sheet.
Certification UL1557 (File number : E339285)
Specifications
Absolute Maximum Ratings at Tc = 25C
Parameter
Symbol
Remarks
Ratings
Supply voltage Collector-emitter voltage
VCC VCE
V+ to U-, V-, W-, surge < 500 V V+ to U, V, W or U, V, W, to U-, V-, W-
*1
450 600
Output current
Io
V+,U-,...
Similar Datasheet