Optocouplers. HCPL-061N Datasheet

HCPL-061N Datasheet PDF, Equivalent


Part Number

HCPL-061N

Description

Optocouplers

Manufacture

HP

Total Page 16 Pages
PDF Download
Download HCPL-061N Datasheet PDF


HCPL-061N Datasheet
H
HCMOS Compatible, High CMR,
10 MBd Optocouplers
Technical Data
HCPL-261A HCPL-061A
HCPL-263A HCPL-063A
HCPL-261N HCPL-061N
HCPL-263N HCPL-063N
Features
• HCMOS/LSTTL/TTL
Performance Compatible
• 1000 V/µs Minimum
Common Mode Rejection
(CMR) at VCM = 50 V (HCPL-
261A Family) and 15 kV/µs
Minimum CMR at VCM =
1000 V (HCPL-261N Family)
• High Speed: 10 MBd Typical
• AC and DC Performance
Specified over Industrial
Temperature Range -40°C to
+85°C
• Available in 8 Pin DIP,
SOIC-8 Packages
• Safety Approval
UL Recognized per UL1577
2500 V rms for 1 minute and
5000 V rms for 1 minute
(Option 020)
CSA Approved
VDE 0884 Approved with
VIORM = 630 V peak for
HCPL-261A/261N
Option 060
• Computer-Peripheral
Interface
• Digital Isolation for A/D,
D/A Conversion
• Switching Power Supplies
• Instrumentation
Input/Output Isolation
• Ground Loop Elimination
• Pulse Transformer
Replacement
Description
The HCPL-261A family of optically
coupled gates shown on this data
sheet provide all the benefits of the
industry standard 6N137 family
with the added benefit of HCMOS
compatible input current. This
allows direct interface to all
common circuit topologies without
additional LED buffer or drive
components. The AlGaAs LED
used allows lower drive currents
and reduces degradation by using
the latest LED technology. On the
single channel parts, an enable
output allows the detector to be
strobed. The output of the detector
IC is an open collector schottky-
clamped transistor. The internal
shield provides a minimum
common mode transient immunity
of 1000 V/µs for the HCPL-261A
family and 15000 V/µs for the
HCPL-261N family.
Functional Diagram
HCPL-261A/261N
HCPL-061A/061N
NC 1
8 VCC
ANODE 2
7 VE
CATHODE 3
6 VO
HCPL-263A/263N
HCPL-063A/063N
ANODE 1 1
CATHODE 1 2
8 VCC
7 VO1
CATHODE 2 3
6 VO2
Applications
• Low Input Current (3.0 mA)
HCMOS Compatible Version
of 6N137 Optocoupler
• Isolated Line Receiver
• Simplex/Multiplex Data
Transmission
NC 4
SHIELD
5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED ENABLE OUTPUT
ON
OFF
ON
OFF
ON
OFF
H
H
L
L
NC
NC
L
H
H
H
L
H
ANODE 2 4
SHIELD
5 GND
TRUTH TABLE
(POSITIVE LOGIC)
LED
ON
OFF
OUTPUT
L
H
The connection of a 0.1 µF bypass capacitor between pins 5 and 8 is required.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
1-166
5965-3593E

HCPL-061N Datasheet
Selection Guide
Minimum CMR
dV/dt
(V/µs)
NA
VCM
(V)
NA
Input
On-
Current
(mA)
5
5,000 50
10,000 1,000
1,000
3,500
1,000
50
300
50
3
1,000[2] 1,000
1,000 50
12.5
Output
Enable
YES
NO
YES
NO
YES
NO
YES
YES
YES
NO
YES
NO
[3]
8-Pin DIP (300 Mil)
Small-Outline SO-8
Widebody
(400 Mil)
Hermetic
Single
Channel
Package
Dual
Channel
Package
Single
Channel
Package
Dual
Channel
Package
Single
Channel
Package
Single and
Dual Channel
Packages
6N137[1]
HCPL-0600[1]
HCNW137[1]
HCPL-2630[1]
HCPL-0630[1]
HCPL-2601[1]
HCPL-0601[1]
HCNW2601[1]
HCPL-2631[1]
HCPL-0631[1]
HCPL-2611[1]
HCPL-0611[1]
HCNW2611[1]
HCPL-4661[1]
HCPL-0661[1]
HCPL-2602[1]
HCPL-2612[1]
HCPL-261A
HCPL-061A
HCPL-263A
HCPL-063A
HCPL-261N
HCPL-061N
HCPL-263N
HCPL-063N
HCPL-193X[1]
HCPL-56XX[1]
HCPL-66XX[1]
Notes:
1. Technical data are on separate HP publications.
2. 15 kV/µs with VCM = 1 kV can be achieved using HP application circuit.
3. Enable is available for single channel products only, except for HCPL-193X devices.
Ordering Information
Specify Part Number followed by Option Number (if desired).
Example:
HCPL-261A#XXX
020 = 5000 V rms/1 minute UL Rating Option*
060 = VDE 0884 VIORM = 630 Vpeak Option**
300 = Gull Wing Surface Mount Option***
500 = Tape and Reel Packaging Option
Option data sheets available. Contact your Hewlett-Packard sales representative or authorized distributor for
information.
*For HCPL-261A/261N/263A/263N (8-pin DIP products) only.
**For HCPL-261A/261N only. Combination of Option 020 and Option 060 is not available.
***Gull wing surface mount option applies to through hole parts only.
Schematic
IF
2+
HCPL-261A/261N
HCPL-061A/061N
ICC
IO
8 VCC
6 VO
1 IF1
+
VF1
2
VF
3
SHIELD
IE 7
VE
USE OF A 0.1 µF BYPASS CAPACITOR CONNECTED
BETWEEN PINS 5 AND 8 IS RECOMMENDED (SEE NOTE 16).
GND
5
3 IF2
VF2
+
4
HCPL-263A/263N
HCPL-063A/063N
SHIELD
SHIELD
ICC 8 VCC
IO1 7 VO1
IO2 6 VO2
GND
5
1-167


Features Datasheet pdf H HCMOS Compatible, High CMR, 10 MBd Op tocouplers Technical Data HCPL-261A H CPL-061A HCPL-263A HCPL-063A HCPL-261N HCPL-061N HCPL-263N HCPL-063N Features • HCMOS/LSTTL/TTL Performance Compat ible • 1000 V/µs Minimum Common Mode Rejection (CMR) at VCM = 50 V (HCPL261 A Family) and 15 kV/µs Minimum CMR at VCM = 1000 V (HCPL-261N Family) • Hig h Speed: 10 MBd Typical • AC and DC P erformance Specified over Industrial Te mperature Range -40°C to +85°C • Av ailable in 8 Pin DIP, SOIC-8 Packages Safety Approval UL Recognized per UL 1577 2500 V rms for 1 minute and 5000 V rms for 1 minute (Option 020) CSA Appr oved VDE 0884 Approved with VIORM = 630 V peak for HCPL-261A/261N Option 060 • Computer-Peripheral Interface • D igital Isolation for A/D, D/A Conversio n • Switching Power Supplies • Inst rumentation Input/Output Isolation • Ground Loop Elimination • Pulse Trans former Replacement Description The HCPL -261A family of optically coupled gates shown on this data shee.
Keywords HCPL-061N, datasheet, pdf, HP, Optocouplers, CPL-061N, PL-061N, L-061N, HCPL-061, HCPL-06, HCPL-0, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)