TVS Diode
5KP Series
TVS Diodes
Axial Leaded – 5 kW > 5KP series
RoHS
Pb e3
Uni-directional
Description
The 5KP Series is des...
Description
5KP Series
TVS Diodes
Axial Leaded – 5 kW > 5KP series
RoHS
Pb e3
Uni-directional
Description
The 5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Bi-directional
Agency Approvals
Agency
Agency File Number E230531
Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted)
Parameter
Symbol Value Unit
Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.2)(Note 1)
PPPM
5
kW
Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC
PD
8.0
W
Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2)
IFSM
400
A
Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only (Note 3)
VF
3.5/5.0 V
Operating Junction and Storage Temperature Range
TJ, TSTG -55 to 175 °C
Typical Thermal Resistance Junction to Lead
RθJL
Typical Thermal Resistance Junction to Ambient RθJA
8.0 °C/W 40 °C/W
Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3. 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. 3. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts.
Functional Diagram
Features
5 kW peak pulse capability Typical IR less than 2μA
at 10/1000μs waveform,
when VBR min>12V
repetition rate (duty
High temperature
cycles):0.01%
to reflow soldering
Glass passivated chip...
Similar Datasheet