Digitally Enhanced Power Analog Controller
MCP19122/3
Digitally Enhanced Power Analog Controller with Integrated Synchronous Driver
Synchronous Buck Features
• I...
Description
MCP19122/3
Digitally Enhanced Power Analog Controller with Integrated Synchronous Driver
Synchronous Buck Features
Input Voltage: 4.5V to 40V (operating), 48V (non-operating)
Output Voltage: 0.3V to 16V - 0.1% typical output voltage accuracy - Greater than 16V requires external divider
Switching Frequency: 100 kHz to 1.6 MHz Shutdown Quiescent Current: 50 µA Typical High-Drive:
- +5V Gate Drive - 2A Source Current - 2A Sink Current Low-Drive: - +5V Gate Drive - 2A Source Current - 4A Sink Current Emulated Average Current Mode Control Differential Remote Output Sense Multi-Phase Systems: - Master or Slave - Frequency Synchronized - Common Current Sense Signal Multiple Output Systems: - Master or Slave - Frequency Synchronized AEC-Q100 Qualified Configureable Parameters: - Overcurrent Limit - Input Undervoltage Lockout - Input Overvoltage - Output Overvoltage - Output Undervoltage - Internal Analog Compensation - Soft Start Profile - Syn...
Similar Datasheet