3.3 or 5 Volt VCSEL/FP Laser Driver IC
M02069-12
3.3 or 5 Volt VCSEL/FP Laser Driver IC for Applications to 4.3 Gbps
Rev V2
Applications
• EPON FTTH modules ...
Description
M02069-12
3.3 or 5 Volt VCSEL/FP Laser Driver IC for Applications to 4.3 Gbps
Rev V2
Applications
EPON FTTH modules Gigabit Ethernet modules 1G/2G/4G Fibre Channel modules Digital Video
Features
High speed operation; suitable for SFP/SFF applications from 155Mbps to 4.3 Gbps.
Supports Common Anode VCSEL, Common Cathode VCSEL, or FP LASER. May be used with or without a monitor photodiode.
Programmable temperature compensation. Modulation output and bias output can be controlled using the programmable module controller M02088 or a few discrete resistors.
Supports DDMI (SFF-8472) diagnostics. DC or AC coupled modulation drive. Peaking circuit to optimize VCSEL response. Low overshoot allows high extinction ratio with low jitter. Supports E-PON burst mode with no extra components Automatic Laser Power Control, with “Slow-Start”. 3.3V or 5V operation
The M02069 is a highly integrated, programmable VCSEL driver intended for SFP/...
Similar Datasheet