Document
M02050-15
3.3/5V Limiting Amplifier for Aplications to 2.5 Gbps
Preliminary - Rev V5P
Preliminary Information—Subject to Change
Applications
• 2.5 Gbps STM-16/OC-48 SDH/SONET • 1.06, 2.12 and 4.24 Gbps Fibre Channel • 1.25 Gbps Ethernet • 2.67 Gbps SDH/SONET with FEC
Features
• Operates with a 3.3 or 5V supply • 4 mV typical input sensitivity at 2.5 Gbps • PECL outputs • Rate Selection for ≤ 1.25 Gbps operation • Average Receive power monitor output (RSSIAVG) • Peak-to-peak Receive power monitor output (RSSIPP) • On-chip DC offset cancellation circuit • Low power (< 180 mW at 3.3V) • Programmable CML Output Amplitude Level • Output Jam Function • 16 pin 3x3 QFN package
The M02050-15 is an integrated high-gain limiting amplifier. The M02050-15 features PECL outputs and is intended for use in applications to 2.5 Gbps. Full output swing is achieved even at minimum input sensitivity. The M02050-15 can operate with a 3.3V or 5V supply.
Rate select is s.