www.vishay.com
VS-30.PF0.-M3 Series
Vishay Semiconductors
Fast Soft Recovery Rectifier Diode, 30 A
1
3
TO-247AC 2L
Base cathode
2
1 2 3
TO-247AC 3L
Base cathode
2
1 Cathode
3 Anode
VS-30EPF0...
Anode 1
Anode 3
VS-30APF0...
PRIMARY CHARACTERISTICS
IF(AV) VR VF at IF IFSM trr TJ max. Package
30 A 200 V, 400 V, 600 V
1.41 V 320 A 60 ns 150 °C TO-247AC 2L, TO-247AC 3L
Circuit configuration
Single
Snap factor
0.6
FEATURES
• Glass passivated pellet chip junction
• 150 °C max. operating junction temperature
• Low forward voltage drop and short reverse recovery time
• Designed and qualified according to JEDEC®-JESD 47
Available
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
APPLICATIONS
These devices are intended for use in output rectification and freewheeling in inverters, choppers and converters as well as in input rectification where severe restrictions on conducted EMI should be met.
DESCRIPTION
The VS-30EPF06-M3 and VS-30APF06-M3 soft recovery rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop.
The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
CHARACTERISTICS
IF(AV) VRRM IFSM VF trr TJ
Sinusoidal waveform
10 A, TJ = 25 °C 1 A, 100 A/μs
VALUES 30
200 to 600 320 1.2 60
-40 to +150
UNITS A V A V ns °C
VOLTAGE RATINGS
PART NUMBER
VS-30EPF02-M3, VS-30APF02-M3 VS-30EPF04-M3, VS-30APF04-M3 VS-30EPF06-M3, VS-30APF06-M3
VRRM, MAXIMUM PEAK REVERSE VOLTAGE V
200
400
600
VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V
300
500
700
IRRM AT 150 °C
mA
5
Revision: 29-Nov-2019
1
Document Number: 93693
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
VS-30.PF0.-M3 Series
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Maximum average forward current
IF(AV)
Maximum peak one cycle non-repetitive surge current
IFSM
Maximum I2t for fusing
I2t
Maximum I2√t for fusing
I2√t
TEST CONDITIONS TC = 98 °C, 180° conduction half sine wave 10 ms sine pulse, rated VRRM applied 10 ms sine pulse, no voltage reapplied 10 ms sine pulse, rated VRRM applied 10 ms sine pulse, no voltage reapplied t = 0.1 ms to 10 ms, no voltage reapplied
VALUES 30 270 320 365 515
5150
UNITS A
A2s A2√s
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
Maximum forward voltage drop
VFM
Forward slope resistance Threshold voltage
rt VF(TO)
Maximum reverse leakage current
IRM
TEST CONDITIONS 30 A, TJ = 25 °C
TJ = 150 °C
TJ = 25 °C TJ = 150 °C
VR = Rated VRRM
VALUES 1.41 12.5 0.9 0.1 5.0
UNITS V
mΩ V
mA
RECOVERY CHARACTERISTICS
PARAMETER
SYMBOL
Reverse recovery time
trr
Reverse recovery current
Irr
Reverse recovery charge
Qrr
Snap factor
S
TEST CONDITIONS
IF at 20 Apk 100 A/μs 25 °C
Typical
VALUES 160 10 1.25 0.6
UNITS ns A μC
IFM trr
ta tb
t
dir
dt
Qrr
IRM(REC)
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum junction and storage temperature range
TJ, TStg
Maximum thermal resistance, junction to case
RthJC
DC operation
Maximum thermal resistance, junction to ambient
RthJA
Maximum thermal resistance, case to heatsink
RthCS
Mounting surface, smooth and greased
Approximate weight
Mounting torque
minimum maximum
Marking device
Case style TO-247AC 2L Case style TO-247AC 3L
VALUES -40 to +150
UNITS °C
0.8
40
°C/W
0.2
6
g
0.21
oz.
6 (5) 12 (10)
kgf · cm (lbf · in)
30EPF02
30EPF04
30EPF06
30APF02
30APF04
30APF06
Revision: 29-Nov-2019
2
Document Number: 93693
For technical questions within your region:
[email protected],
[email protected],
[email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Maximum Allowable Case Temperature (°C)
Maximum Allowable Case Temperature (°C)
www.vishay.com
150
30.PF.. Series
140
RthJC (DC) = 0.8 K/W
130
Ø
120
Conduction angle
110
100
90 0
30° 60° 90° 120° 180°
5 10 15 20 25 30 35 Average Forward Current (A)
Fig. 1 - Current Rating Characteristics
150
30.PF.. Series
140
RthJC (DC) = 0.8 K/W
130
Ø
Conduction period
120
110
100
90 0
30°
60°
90°
120°
180°
DC
5 10 15 20 25 30 35 40 45 50
Average Forward Current (A)
Fig. 2 - Current Rating Characteristics
35
180°
30
120°
90°
25
60° 30°
20
RMS limit
15
10
5
0 0
Ø
Conduction angle
30.PF.. Series TJ = 150 °C
5
10
15
20
25
Average Forward Current (A)
Fig. 3 - Forward Power Loss Characteristics
Peak Half Sine Wave Forwa.