SMBJ10 SUPPRESSOR Datasheet

SMBJ10 Datasheet, PDF, Equivalent


Part Number

SMBJ10

Description

TRANSIENT VOLTAGE SUPPRESSOR

Manufacture

GME

Total Page 6 Pages
Datasheet
Download SMBJ10 Datasheet


SMBJ10
Production specification
TRANSIENT VOLTAGE SUPPRESSOR
SMBJ5.0--SMBJ440CA
FEATURES
z Glass passivated junction
z Low incremental surge resistance, excellent clamping capability
z Low profile package with built-in strain relief for surface mounted applications
z 600W peak pulse power capability with a 10/1000μs
Wave form, repetition rate (duty cycle): 0.01%
z Very fast response time
z High temperature soldering guaranteed: 250°C/10 seconds at terminals
MECHANICAL DATA
z Case: JEDEC DO-214AA molded plastic over passivated chip
z Terminals: solder plated, solderable per MIL-STD-750, method 2026
z Polarity: foruni-directional types the color band denotes the cathode, which is postitive with respect to the
anode under normal TVS operation
z Mounting position: any Weight: 0.002 ounces, 0.064 grams
Devices for Bidirectional Applications
For bi-directional devices, use suffix C or CA (e.g. SMBJ10C, SMBJ10CA). Electrical characteristics apply in both
directions.
Maximum Ratings and Thermal Characteristics (TA=25unless otherwise noted)
Characteristic
Symbol
Value
Peak power dissipation with a 10/1000μs waveform
(NOTE 1,2, FIG.1)
PPPM
Minimum 600
Peak pulse current with a 10/1000μs waveform (NOTE 1)
IPPM See Table Below
Unit
W
A
Typical thermal resistance, junction to ambient ( (NOTE 2)
Peak forward surge current, 8.3ms single half sine-wave uni-directional
only (NOTE 3)
R θ JA
IFSM
100.0
100.0
/W
A
Typical thermal resistance, junction to lead
R θJL
20 /W
Operating junction and storage temperature range
TJ, TSTG
NOTES: (1) Non-repetitive current pules, per Fig. 3 and derated above TA=25 per Fig. 2.
(2) Mounted on minimum recommended pad layout.
(3) Mounted on 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal.
-55---+150
Document Number: SMB601AF
www.gmicroelec.com
1

SMBJ10
TRANSIENT VOLTAGE SUPPRESSOR
ELECTRICAL CHARACTERISTICS (TA=25)
Type
SMBJ5.0
SMBJ5.0A
SMBJ6.0
SMBJ6.0A
SMBJ6.5
SMBJ6.5A
SMBJ6.8
SMBJ6.8A
SMBJ7.0
SMBJ7.0A
SMBJ7.5
SMBJ7.5A
SMBJ8.0
SMBJ8.0A
SMBJ8.5
SMBJ8.5A
SMBJ9.0
SMBJ9.0A
SMBJ10
SMBJ10A
SMBJ11
SMBJ11A
SMBJ12
SMBJ12A
SMBJ13
SMBJ13A
SMBJ14
SMBJ14A
SMBJ15
SMBJ15A
SMBJ16
SMBJ16A
SMBJ17
SMBJ17A
SMBJ18
SMBJ18A
Dynamic
V
Min Max
6.40 7.82
6.40 7.07
6.67 8.15
6.67 7.37
7.22 8.82
7.22 7.98
7.56 9.24
7.56 8.35
7.78 9.51
7.78 8.60
8.33 10.2
8.33 9.21
8.89 10.9
8.89 9.83
9.44 11.5
9.44 10.4
10.0 12.2
10.0 11.1
11.1 13.6
11.1 12.3
12.2 14.9
12.2 13.5
13.3 16.3
13.3 14.7
14.4 17.6
14.4 15.9
15.6 19.1
15.6 17.2
16.7 20.4
16.7 18.5
17.8 21.8
17.8 19.7
18.9 23.1
18.9 20.9
20.0 24.4
20.0 22.1
@IT
mA
10
10
10
10
10
10
10
10
10
10
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
VWM
V
5.0
5.0
6.0
6.0
6.5
6.5
6.8
6.8
7.0
7.0
7.5
7.5
8.0
8.0
8.5
8.5
9.0
9.0
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
Production specification
SMBJ5.0--SMBJ440CA
IRM
VWM
uA
800
800
800
800
500
500
200
200
200
200
100
100
50
50
20
20
10
10
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
IPPM
A
62.5
65.2
52.6
58.3
48.8
53.6
49.5
54.6
45.1
50.0
42.0
46.5
40.0
44.1
37.7
41.7
35.5
39.0
31.9
35.3
29.9
33.0
27.3
30.2
25.2
27.9
23.3
25.9
22.3
24.6
20.8
23.1
19.7
21.7
18.6
20.5
VC
IPPM
V
9.6
9.2
11.4
10.3
12.3
11.2
12.1
11.0
13.3
12.0
14.3
12.9
15.0
13.6
15.9
14.4
16.9
15.4
18.8
17.0
20.1
18.2
22.0
19.9
23.8
21.5
25.8
23.2
26.9
24.4
28.8
26.0
30.5
27.6
32.2
29.2
Document Number: SMB601AF
www.gmicroelec.com
2


Features Production specification TRANSIENT VOLT AGE SUPPRESSOR SMBJ5.0--SMBJ440CA FEA TURES z Glass passivated junction z L ow incremental surge resistance, excell ent clamping capability z Low profile package with built-in strain relief for surface mounted applications z 600W p eak pulse power capability with a 10/10 00μs Wave form, repetition rate (duty cycle): 0.01% z Very fast response ti me z High temperature soldering guaran teed: 250°C/10 seconds at terminals M ECHANICAL DATA z Case: JEDEC DO-214AA molded plastic over passivated chip z T erminals: solder plated, solderable per MIL-STD-750, method 2026 z Polarity: f oruni-directional types the color band denotes the cathode, which is postitive with respect to the anode under normal TVS operation z Mounting position: any Weight: 0.002 ounces, 0.064 grams Devi ces for Bidirectional Applications For bi-directional devices, use suffix C or CA (e.g. SMBJ10C, SMBJ10CA). Electrica l characteristics apply in both directions. Maximum Ratings an.
Keywords SMBJ10, datasheet, pdf, GME, TRANSIENT, VOLTAGE, SUPPRESSOR, MBJ10, BJ10, J10, SMBJ1, SMBJ, SMB, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)