460 Watts. DS460S-3 Datasheet

DS460S-3 Watts. Datasheet pdf. Equivalent

Part DS460S-3
Description 460 Watts
Feature DS460S-3 460 Watts Distributed Power System Technical Reference Note Rev.04.30.15_#1.4 DS460S-3 Ser.
Manufacture Artesyn
Datasheet
Download DS460S-3 Datasheet

DS460S-3 460 Watts Distributed Power System Technical Refer DS460S-3 Datasheet
DS460S-3 460 Watts Distributed Power System Rev.03.15.13_#1 DS460S-3 Datasheet
POWER Data Sheet Total Output Power: 460 Watts +12 Vdc Stan DS460S-3-003 Datasheet
POWER Data Sheet Total Output Power: 460 Watts +12 Vdc Stan DS460S-3-004 Datasheet
POWER Data Sheet Total Output Power: 460 Watts +12 Vdc Stan DS460S-3-005 Datasheet
Recommendation Recommendation Datasheet DS460S-3 Datasheet





DS460S-3
DS460S-3
460 Watts
Distributed Power System
Technical Reference Note
Rev.04.30.15_#1.4
DS460S-3 Series
Page 1
Total Power: 460 Watts
Input Voltage: 90-264 Vac
# of Outputs: Main + Standby
Special Features
• Active power factor correction
• EN61000-3-2 harmonic
compliance
• Active AC inrush control
• 1U X 2U short form factor
• +12 Vdc Output
• +12 Vdc stand-by
• Hot plug operation
• N + 1 redundant
• High efficiency redundancy
• Active current sharing
• Built-in cooling fan
• I2C communication interface bus
• PMBus compliant
• EERPOM for FRU data
• One year warranty
Safety
UL/cUL 60950 (UL Recognized)
NEMKO 60950
CB Certificate and report
CE Mark (LVD)
Product Descriptions
The DS460S-3 series high-efficiency bulk front-end power supply is
intended for systems that use distributed power architectures. Rated at
460 watts, the DS460S-3 power supply generates a main payload output of
12 Vdc and an auxiliary output of 12 Vdc for powering standby circuitry.
These power supplies are digitally programmable – they are equipped with
an I2C interface and use the industry-standard PMBus™ communications
protocol.
The DS460S-3 power supply is intended primarily for use in rack-mounting
server type applications, such as data centers. The power supply uses an
advanced power conversion topology to maximize efficiency and have
exceptionally compact form factors; these models have a height of just 1.6
inches, which makes them ideal for use in 1U high rack-mounting
equipment.
DS460S-3 power supply features a wide 90 to 264 Vac input voltage range
and employs active power factor correction to minimize input harmonic
current distortion and to ensure compliance with the international
EN61000-3-2 standard – they have a power factor of 0.99 typical.
The supply has a 1U x 2U form factor – it measures only 7.75 inches in
length, ideally suitable for length limited applications. When fed with a high
line 230 Vac input, the DS460S-3 can achieve a very high – 92
percent typical conversion efficiency at 50 percent full load.



DS460S-3
Technical Reference Note
Model Numbers
Standard
Output Voltage Minimum Load Maximum Load
DS460S-3-002
12.3 Vdc
1A
36A
DS460S-3-003
12.3 Vdc
1A
36A
Rev.04.30.15_#1.4
DS460S-3 Series
Page 2
Stand-By
Supply
12V @2.3A
12V @2.3A
Air Flow
Direction
Normal
(DC Connector to
Handle)
Reversed
(Handle to DC
Connector)
Options
None
Artesyn Embedded Technologies





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)