Multi-Modulus Prescaler. 1GC1-8290 Datasheet

1GC1-8290 Prescaler. Datasheet pdf. Equivalent


Part 1GC1-8290
Description DC - 12 GHz Multi-Modulus Prescaler
Feature Keysight 1GC1-8290 DC - 12 GHz Multi-Modulus Packaged Prescaler 1GC1-8290-BLK 7” diameter reel/500 e.
Manufacture Keysight
Datasheet
Download 1GC1-8290 Datasheet


Keysight 1GC1-8290 DC - 12 GHz Multi-Modulus Packaged Presca 1GC1-8290 Datasheet
Recommendation Recommendation Datasheet 1GC1-8290 Datasheet




1GC1-8290
Keysight 1GC1-8290
DC - 12 GHz Multi-Modulus
Packaged Prescaler
1GC1-8290-BLK 7” diameter reel/500 each
1GC1-8290-TR1 bubble strip/10 each
Data Sheet
Features
– Multi–modulus (ECL selectable)
divide by 1,2,4,8, or 16
– Input frequency range:
0.1 to 12 GHz (sinewave input)
DC to 12 GHz (squarewave input)
– High input power sensitivity:
On–chip pre– and post–amps
-20 to +10 dBm (Typ. 0.5 to 6 GHz)
–15 to +10 dBm (Typ. 6 to 10 GHz)
–10 to +5 dBm (Typ. 10 to 12 GHz)
– Dual–mode Pout:
0.0 dBm [0.5 Vp–p] @ 96 mA
+6.0 dBm [1.0 Vp–p] @ 118 mA
– Low phase noise:
–153 dBc/Hz @ 100 kHz offset
– Positive or negative single supply bias
operation
– Wide bias supply range:
4.5 to 6.5 volt operating range
– Differential I/0 with on–chip
50 Ω matching
– Available in RoHS compliant, 20 pin
4 mm x 4 mm QFN SMT package with
integral heat sink



1GC1-8290
02 | Keysight | 1GC1-8290 DC - 12 GHz Multi-Modulus Packaged Prescaler - Data Sheet
Description
The 1GC1-8290 GaAs HBT MMIC prescaler offers broadband frequency translation for use
in communications and EW systems incorporating high–frequency PLL oscillator circuits
and signal–path down conversion applications. The prescaler provides multiple–modulus
division and input signal pass–through capability as well as a large input sensitivity
window, and low phase–noise. The 1GC1-8290 is available in either die form (1GC1-4021)
or a 20–pin surface-mount QFN package (1GC1- 8290). In addition to the features listed
above the component offers differential I/O, dual–output power mode plus an input
disable pin to eliminate any false triggers or self–oscillation condition.
Absolute maximum ratings1
(@ TA = 25 °C, unless otherwise indicated)
Symbol Parameters/conditions
Min Max Units
VCC
VEE
VCC VEE
VA1,A2,A3
VDisable
VLogic
Pin(CW)
VRFin
T [2]
op
Tst
Tmax
Bias supply voltage
Bias supply voltage
Bias supply delta
Modulus select voltage
Pre–amp disable voltage
Logic threshold voltage
CW RF input power
DC input voltage
(@ RFin or RFin ports)
Pkg heatsink operating temp.
Storage temperature
Maximum solder reflow temp.
(Max. 3 cycles @ 30 sec/cycle)
–7
0
VLogic–2
VEE
VCC –1.5
–40
–65
+7
+7
VCC
VCC
VCC –1.2
+10
VCC ±0.5
+85
+165
260
Volts
Volts
Volts
Volts
Volts
Volts
dBm
Volts
°C
°C
°C
1. 
2. 
OM(TpTopeT)rFwat>iilo1l Xnd1ein0g6reahxdoceeusrMssT@oTfFaT.onpyp8a5ra°mC.eOteprelrimatiito(nexinceepxtceTosps)
may cause permanent damage to the device.
of maximum package pin operating temperature
– Package type: Quad flat - no
pins (SMT QFN)
– Package dimensions: 4.0 x 4.0
mm (0.157 x 0.157 in)
– Package thickness: 0.90 ±
0.10 mm (0.035 ± 0.0039 in)
– Pin pitch: 0.5 mm (0.0197 in)
– Pin width: 0.2 mm (0.009 in)







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)