STATE LAMP. WP4060YD Datasheet

WP4060YD LAMP. Datasheet pdf. Equivalent

WP4060YD Datasheet
Recommendation WP4060YD Datasheet
Part WP4060YD
Description SOLID STATE LAMP
Feature WP4060YD; WP4060YD 1.8 mm Solid State Lamp DESCRIPTION z The Yellow source color devices are made with Gallium.
Manufacture Kingbright
Datasheet
Download WP4060YD Datasheet




Kingbright WP4060YD
WP4060YD
1.8 mm Solid State Lamp
DESCRIPTION
z The Yellow source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide
Yellow Light Emitting Diode
FEATURES
z 1.8 mm diameter small size LED lamp
z Versatile mounting on P.C. board or panel
z Reliable and rugged
z RoHS compliant
APPLICATIONS
z Status indicator
z Illuminator
z Signage applications
z Decorative and entertainment lighting
z Commercial and residential architectural lighting
PACKAGE DIMENSIONS
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change
without prior notice.
SELECTION GUIDE
Part Number
WP4060YD
Emitting Color
(Material)
Lens Type
Yellow (GaAsP/GaP)
Yellow Diffused
Iv (mcd) @ 10mA [2]
Min.
Typ.
Viewing Angle [1]
2θ1/2
4
8
70°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAF3408 / 1101004310 Rev No: V.7B Date: 04/13/2019
Page 1 / 5



Kingbright WP4060YD
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 10mA
Dominant Wavelength IF = 10mA
Spectral Bandwidth at 50% Φ REL MAX
IF = 10mA
Capacitance
λpeak
λdom [1]
Δλ
C
Yellow
Yellow
Yellow
Yellow
Forward Voltage IF = 10mA
VF [2]
Yellow
Reverse Current (VR = 5V)
IR
Yellow
Temperature Coefficient of λpeak
IF = 10mA, -10°C T 85°C
TCλpeak
Yellow
Temperature Coefficient of λdom
IF = 10mA, -10°C T 85°C
TCλdom
Yellow
Temperature Coefficient of VF
IF = 10mA, -10°C T 85°C
TCV
Yellow
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
WP4060YD
Value
Typ.
Max.
590
-
588
-
35
-
20
-
1.95
2.4
-
10
0.12
-
0.07
-
-2
-
Unit
nm
nm
nm
pF
V
μA
nm/°C
nm/°C
mV/°C
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Value
Unit
Power Dissipation
PD
75
Reverse Voltage
VR
5
Junction Temperature
Tj
110
Operating Temperature
Top
-40 To +85
Storage Temperature
Tstg
-40 To +85
DC Forward Current
IF
30
Peak Forward Current
IFM [1]
140
Electrostatic Discharge Threshold (HBM)
-
8000
Thermal Resistance (Junction / Ambient)
Thermal Resistance (Junction / Solder point)
Lead Solder Temperature [3]
Rth JA [2]
Rth JS [2]
500
320
260°C For 3 Seconds
Lead Solder Temperature [4]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size 16 mm2 per pad).
3. 2mm below package base.
4. 5mm below package base.
5. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAF3408 / 1101004310 Rev No: V.7B Date: 04/13/2019
mW
V
°C
°C
°C
mA
mA
V
°C/W
°C/W
Page 2 / 5



Kingbright WP4060YD
TECHNICAL DATA
RELATIVE INTENSITY vs. WAVELENGTH
100%
Yellow
Ta = 25 °C
80%
60%
40%
20%
0%
350 400 450 500 550 600 650 700 750 800
Wavelength (nm)
WP4060YD
SPATIAL DISTRIBUTION
-15°
15°
Ta = 25 °C
-30°
30°
-45°
45°
-60°
60°
-75°
75°
-90°
90°
1.0
0.5
0.0
0.5
1.0
Forward Current vs.
Forward Voltage
20
Ta = 25 °C
16
12
8
4
0
1.5 1.7 1.9 2.1 2.3 2.5
Forward voltage (V)
Luminous Intensity vs.
Forward Current
2.5
Ta = 25 °C
2.0
YELLOW
Forward Current Derating Curve
50
40
1.5
30
1.0
20
0.5
10
0.0
0 4 8 12 16 20
Forward current (mA)
0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Luminous Intensity vs.
Ambient Temperature
2.5
2.0
1.5
1.0
0.5
0.0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
RECOMMENDED WAVE SOLDERING PROFILE
PACKING & LABEL SPECIFICATIONS
Notes:
1. Recommend pre-heat temperature of 105°C or less (as measured with a thermocouple
attached to the LED pins) prior to immersion in the solder wave with a maximum solder bath
temperature of 260°C
2. Peak wave soldering temperature between 245°C ~ 255°C for 3 sec (5 sec max).
3. Do not apply stress to the epoxy resin while the temperature is above 85°C.
4. Fixtures should not incur stress on the component when mounting and during soldering process.
5. SAC 305 solder alloy is recommended.
6. No more than one wave soldering pass.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAF3408 / 1101004310 Rev No: V.7B Date: 04/13/2019
Page 3 / 5







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)