STATE LAMP. WP7113NC Datasheet

WP7113NC LAMP. Datasheet pdf. Equivalent

WP7113NC Datasheet
Recommendation WP7113NC Datasheet
Part WP7113NC
Description SOLID STATE LAMP
Feature WP7113NC; WP7113NC T-1 3/4 (5mm) Solid State Lamp DESCRIPTION z The Pure Orange source color devices are made .
Manufacture Kingbright
Datasheet
Download WP7113NC Datasheet




Kingbright WP7113NC
WP7113NC
T-1 3/4 (5mm) Solid State Lamp
DESCRIPTION
z The Pure Orange source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide
Pure Orange Light Emitting Diode.
FEATURES
z Low power consumption
z Popular T-1 3/4 diameter package
z General purpose leads
z Reliable and rugged
z Long life - solid state reliability
z Available on tape and reel
z RoHS compliant
APPLICATIONS
z Status indicator
z Illuminator
z Signage applications
z Decorative and entertainment lighting
z Commercial and residential architectural lighting
PACKAGE DIMENSIONS
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change
without prior notice.
SELECTION GUIDE
Part Number
Emitting Color
(Material)
Lens Type
WP7113NC
Pure Orange
(GaAsP/GaP)
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
© 2018 Kingbright. All Rights Reserved. Spec No: DSAF2412 / 1101005139 Rev No: V.8A Date: 07/21/2018
Iv (mcd) @ 10mA [2]
Min.
Typ.
50
100
*30
*70
Viewing Angle [1]
2θ1/2
20°
Page 1 / 5



Kingbright WP7113NC
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 10mA
Dominant Wavelength IF = 10mA
Spectral Bandwidth at 50% Φ REL MAX
IF = 10mA
Capacitance
λpeak
λdom [1]
Δλ
C
Pure Orange
Pure Orange
Pure Orange
Pure Orange
Forward Voltage IF = 10mA
VF [2]
Pure Orange
Reverse Current (VR = 5V)
IR
Pure Orange
Temperature Coefficient of λpeak
IF = 10mA, -10°C T 85°C
TCλpeak
Pure Orange
Temperature Coefficient of λdom
IF = 10mA, -10°C T 85°C
TCλdom
Pure Orange
Temperature Coefficient of VF
IF = 10mA, -10°C T 85°C
TCV
Pure Orange
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
ABSOLUTE MAXIMUM RATINGS at TA=25°C
WP7113NC
Value
Typ.
Max.
607
-
602
-
35
-
15
-
1.95
2.3
-
10
0.13
-
0.06
-
-1.9
-
Unit
nm
nm
nm
pF
V
uA
nm/°C
nm/°C
mV/°C
Parameter
Symbol
Value
Unit
Power Dissipation
Reverse Voltage
Junction Temperature
Operating Temperature
Storage Temperature
DC Forward Current
Peak Forward Current
Electrostatic Discharge Threshold (HBM)
Thermal Resistance (Junction / Ambient)
Thermal Resistance (Junction / Solder point)
Lead Solder Temperature [3]
Lead Solder Temperature [4]
PD
VR
Tj
Top
Tstg
IF
IFM [1]
-
Rth JA [2]
Rth JS [2]
62.5
5
125
-40 to +85
-40 to +85
25
145
8000
400
185
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size 16 mm2 per pad).
3. 2mm below package base.
4. 5mm below package base.
5. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2018 Kingbright. All Rights Reserved. Spec No: DSAF2412 / 1101005139 Rev No: V.8A Date: 07/21/2018
mW
V
°C
°C
°C
mA
mA
V
°C/W
°C/W
Page 2 / 5



Kingbright WP7113NC
TECHNICAL DATA
RELATIVE INTENSITY vs. WAVELENGTH
100%
Orange
Ta = 25 °C
80%
60%
40%
20%
0%
350 400 450 500 550 600 650 700 750 800
Wavelength (nm)
WP7113NC
SPATIAL DISTRIBUTION
-15°
Ta = 25 °C
-30°
-45°
-60°
15°
30°
45°
60°
-75°
75°
-90°
90°
1.0
0.5
0.0
0.5
1.0
Forward Current vs.
Forward Voltage
20
Ta = 25 °C
16
12
8
4
0
1.5 1.7 1.9 2.1 2.3 2.5
Forward voltage (V)
PURE ORANGE
Luminous Intensity vs.
Forward Current
2.5
Ta = 25 °C
2.0
Forward Current Derating Curve
50
40
1.5
30
1.0
20
0.5
10
0.0
0 4 8 12 16 20
Forward current (mA)
0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Luminous Intensity vs.
Ambient Temperature
2.5
2.0
1.5
1.0
0.5
0.0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
RECOMMENDED WAVE SOLDERING PROFILE
PACKING & LABEL SPECIFICATIONS
Notes:
1. Recommend pre-heat temperature of 105°C or less (as measured with a thermocouple
attached to the LED pins) prior to immersion in the solder wave with a maximum solder bath
temperature of 260°C
2. Peak wave soldering temperature between 245°C ~ 255°C for 3 sec (5 sec max).
3. Do not apply stress to the epoxy resin while the temperature is above 85°C.
4. Fixtures should not incur stress on the component when mounting and during soldering process.
5. SAC 305 solder alloy is recommended.
6. No more than one wave soldering pass.
© 2018 Kingbright. All Rights Reserved. Spec No: DSAF2412 / 1101005139 Rev No: V.8A Date: 07/21/2018
Page 3 / 5







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)