DatasheetsPDF.com

STATE LAMP. WP7113GT Datasheet

DatasheetsPDF.com

STATE LAMP. WP7113GT Datasheet






WP7113GT LAMP. Datasheet pdf. Equivalent




WP7113GT LAMP. Datasheet pdf. Equivalent





Part

WP7113GT

Description

SOLID STATE LAMP



Feature


WP7113GT T-1 3/4 (5mm) Solid State Lamp DESCRIPTION The Green source color devi ces are made with Gallium Phosphide Gre en Light Emitting Diode FEATURES Low po wer consumption Popular T-1 3/4 diamete r package General purpose leads Reliabl e and rugged Long life - solid state re liability Available on tape and reel Ro HS compliant APPLICATIONS Status indica tor Illuminator Si.
Manufacture

Kingbright

Datasheet
Download WP7113GT Datasheet


Kingbright WP7113GT

WP7113GT; gnage applications Decorative and entert ainment lighting Commercial and residen tial architectural lighting PACKAGE DI MENSIONS Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance i s ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The s pecifications, characteristics and tech nical data describe.


Kingbright WP7113GT

d in the datasheet are subject to change without prior notice. SELECTION GUIDE Part Number Emitting Color (Material) Lens Type WP7113GT ■ Green (GaP) Green Transparent Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the o ptical peak value. 2. Luminous intensit y / luminous flux: +/-15%. 3. Luminous intensity value is tr.


Kingbright WP7113GT

aceable to CIE127-2007 standards. © 202 0 Kingbright. All Rights Reserved. Spec No: DSAF2404 / 1101005015 Rev No: V.9B Date: 05/28/2020 Iv (mcd) @ 10mA [2] Min. Typ. 25 80 Viewing Angle [1] 2θ1/2 20° Page 1 / 5 ELECTRICAL / O PTICAL CHARACTERISTICS at TA=25°C Par ameter Symbol Emitting Color Wavelen gth at Peak Emission IF = 10mA Dominant Wavelength IF = 10mA .

Part

WP7113GT

Description

SOLID STATE LAMP



Feature


WP7113GT T-1 3/4 (5mm) Solid State Lamp DESCRIPTION The Green source color devi ces are made with Gallium Phosphide Gre en Light Emitting Diode FEATURES Low po wer consumption Popular T-1 3/4 diamete r package General purpose leads Reliabl e and rugged Long life - solid state re liability Available on tape and reel Ro HS compliant APPLICATIONS Status indica tor Illuminator Si.
Manufacture

Kingbright

Datasheet
Download WP7113GT Datasheet




 WP7113GT
WP7113GT
T-1 3/4 (5mm) Solid State Lamp
DESCRIPTION
The Green source color devices are made with
Gallium Phosphide Green Light Emitting Diode
FEATURES
Low power consumption
Popular T-1 3/4 diameter package
General purpose leads
Reliable and rugged
Long life - solid state reliability
Available on tape and reel
RoHS compliant
APPLICATIONS
Status indicator
Illuminator
Signage applications
Decorative and entertainment lighting
Commercial and residential architectural lighting
PACKAGE DIMENSIONS
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change
without prior notice.
SELECTION GUIDE
Part Number
Emitting Color
(Material)
Lens Type
WP7113GT
Green (GaP)
Green Transparent
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
© 2020 Kingbright. All Rights Reserved. Spec No: DSAF2404 / 1101005015 Rev No: V.9B Date: 05/28/2020
Iv (mcd) @ 10mA [2]
Min.
Typ.
25
80
Viewing Angle [1]
2θ1/2
20°
Page 1 / 5




 WP7113GT
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 10mA
Dominant Wavelength IF = 10mA
Spectral Bandwidth at 50% Φ REL MAX
IF = 10mA
Capacitance
λpeak
λdom [1]
∆λ
C
Green
Green
Green
Green
Forward Voltage IF = 10mA
VF [2]
Green
Reverse Current (VR = 5V)
IR
Green
Temperature Coefficient of λpeak
IF = 10mA, -10°C T 85°C
TCλpeak
Green
Temperature Coefficient of λdom
IF = 10mA, -10°C T 85°C
TCλdom
Green
Temperature Coefficient of VF
IF = 10mA, -10°C T 85°C
TCV
Green
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
WP7113GT
Value
Typ.
Max.
565
-
568
-
30
-
15
-
2
2.4
-
10
0.1
-
0.06
-
-1.8
-
Unit
nm
nm
nm
pF
V
µA
nm/°C
nm/°C
mV/°C
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Value
Unit
Power Dissipation
Reverse Voltage
Junction Temperature
Operating Temperature
Storage Temperature
DC Forward Current
Peak Forward Current
Electrostatic Discharge Threshold (HBM)
Thermal Resistance (Junction / Ambient)
Thermal Resistance (Junction / Solder point)
Lead Solder Temperature [3]
Lead Solder Temperature [4]
PD
VR
Tj
Top
Tstg
IF
IFM [1]
-
Rth JA [2]
Rth JS [2]
62.5
5
110
-40 to +85
-40 to +85
25
140
8000
590
460
260°C For 3 Seconds
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size ≥ 16 mm2 per pad).
3. 2mm below package base.
4. 5mm below package base.
5. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
mW
V
°C
°C
°C
mA
mA
V
°C/W
°C/W
© 2020 Kingbright. All Rights Reserved. Spec No: DSAF2404 / 1101005015 Rev No: V.9B Date: 05/28/2020
Page 2 / 5




 WP7113GT
WP7113GT
TECHNICAL DATA
RELATIVE INTENSITY vs. WAVELENGTH
100%
80%
Ta = 25 °C
Green
60%
40%
20%
0%
350 400 450 500 550 600 650 700 750 800
Wavelength (nm)
SPATIAL DISTRIBUTION
-15°
15°
Ta = 25 °C
-30°
30°
-45°
45°
-60°
60°
-75°
75°
-90°
90°
1.0
0.5
0.0
0.5
1.0
Forward Current vs.
Forward Voltage
20
Ta = 25 °C
16
12
8
4
0
1.5 1.7 1.9 2.1 2.3 2.5
Forward voltage (V)
Luminous Intensity vs.
Forward Current
2.5
Ta = 25 °C
2.0
GREEN
Forward Current Derating Curve
50
40
1.5
30
1.0
20
0.5
10
0.0
0 4 8 12 16 20
Forward current (mA)
0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Luminous Intensity vs.
Ambient Temperature
2.5
2.0
1.5
1.0
0.5
0.0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
RECOMMENDED WAVE SOLDERING PROFILE
PACKING & LABEL SPECIFICATIONS
Notes:
1. Recommend pre-heat temperature of 105°C or less (as measured with a thermocouple
attached to the LED pins) prior to immersion in the solder wave with a maximum solder bath
temperature of 260°C
2. Peak wave soldering temperature between 245°C ~ 255°C for 3 sec (5 sec max).
3. Do not apply stress to the epoxy resin while the temperature is above 85°C.
4. Fixtures should not incur stress on the component when mounting and during soldering process.
5. SAC 305 solder alloy is recommended.
6. No more than one wave soldering pass.
© 2020 Kingbright. All Rights Reserved. Spec No: DSAF2404 / 1101005015 Rev No: V.9B Date: 05/28/2020
Page 3 / 5



Recommended third-party WP7113GT Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)