STATE LAMP. WP7113SURC Datasheet

WP7113SURC LAMP. Datasheet pdf. Equivalent

WP7113SURC Datasheet
Recommendation WP7113SURC Datasheet
Part WP7113SURC
Description SOLID STATE LAMP
Feature WP7113SURC; WP7113SURC T-1 3/4 (5mm) Solid State Lamp DESCRIPTIONS z The Hyper Red source color devices are made.
Manufacture Kingbright
Datasheet
Download WP7113SURC Datasheet




Kingbright WP7113SURC
WP7113SURC
T-1 3/4 (5mm) Solid State Lamp
DESCRIPTIONS
z The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode
z Electrostatic discharge and power surge could
damage the LEDs
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs
z All devices, equipments and machineries must be
electrically grounded
FEATURES
z Low power consumption
z Popular T-1 3/4 diameter package
z General purpose leads
z Reliable and rugged
z Long life - solid state reliability
z Available on tape and reel
z RoHS compliant
APPLICATIONS
z Status indicator
z Illuminator
z Signage applications
z Decorative and entertainment lighting
z Commercial and residential architectural lighting
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change
without prior notice.
SELECTION GUIDE
Part Number
Emitting Color
(Material)
Lens Type
WP7113SURC
Hyper Red
(AlGaInP)
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAF2439 / 1101005304 Rev No: V.8A Date: 07/07/2017
Iv (mcd) @ 20mA [2]
Min.
Typ.
Viewing Angle [1]
2θ1/2
2900
3800
20°
*1000
*1400
Page 1 / 5



Kingbright WP7113SURC
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 20mA
Dominant Wavelength IF = 20mA
Spectral Bandwidth at 50% Φ REL MAX
IF = 20mA
Capacitance
λpeak
λdom [1]
Δλ
C
Hyper Red
Hyper Red
Hyper Red
Hyper Red
Forward Voltage IF = 20mA
VF [2]
Hyper Red
Reverse Current (VR = 5V)
IR
Hyper Red
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
WP7113SURC
Value
Unit
Typ.
Max.
645
-
nm
630
-
nm
27
-
nm
45
-
pF
1.9
2.5
V
-
10
uA
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Value
Power Dissipation
PD
75
Reverse Voltage
VR
5
Junction Temperature
Tj
115
Operating Temperature
Top
-40 to +85
Storage Temperature
Tstg
-40 to +85
DC Forward Current
IF
30
Peak Forward Current
IFM [1]
185
Electrostatic Discharge Threshold (HBM)
-
Lead Solder Temperature [2]
3000
260°C For 3 Seconds
Lead Solder Temperature [3]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
4. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAF2439 / 1101005304 Rev No: V.8A Date: 07/07/2017
Unit
mW
V
°C
°C
°C
mA
mA
V
Page 2 / 5



Kingbright WP7113SURC
WP7113SURC
TECHNICAL DATA
RELATIVE INTENSITY vs. WAVELENGTH
Red
100%
Ta = 25 °C
80%
60%
40%
20%
0%
350 400 450 500 550 600 650 700 750 800
Wavelength (nm)
SPATIAL DISTRIBUTION
-15°
15°
Ta = 25 °C
-30°
30°
-45°
45°
-60°
60°
-75°
75°
-90°
90°
1.0
0.5
0.0
0.5
1.0
Forward Current vs.
Forward Voltage
50
Ta = 25 °C
40
30
20
10
0
1.5 1.7 1.9 2.1 2.3 2.5
Forward voltage (V)
Luminous Intensity vs.
Forward Current
2.5
Ta = 25 °C
2.0
HYPER RED
Forward Current Derating Curve
50
40
1.5
30
1.0
20
0.5
10
0.0
0 10 20 30 40 50
Forward current (mA)
0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Luminous Intensity vs.
Ambient Temperature
2.5
2.0
1.5
1.0
0.5
0.0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
RECOMMENDED WAVE SOLDERING PROFILE
PACKING & LABEL SPECIFICATIONS
Notes:
1. Recommend pre-heat temperature of 105°C or less (as measured with a thermocouple
attached to the LED pins) prior to immersion in the solder wave with a maximum solder bath
temperature of 260°C
2. Peak wave soldering temperature between 245°C ~ 255°C for 3 sec (5 sec max).
3. Do not apply stress to the epoxy resin while the temperature is above 85°C.
4. Fixtures should not incur stress on the component when mounting and during soldering process.
5. SAC 305 solder alloy is recommended.
6. No more than one wave soldering pass.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAF2439 / 1101005304 Rev No: V.8A Date: 07/07/2017
Page 3 / 5







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)