STATE LAMP. WP63ID Datasheet

WP63ID LAMP. Datasheet pdf. Equivalent

WP63ID Datasheet
Recommendation WP63ID Datasheet
Part WP63ID
Description SOLID STATE LAMP
Feature WP63ID; WP63ID T-1 3/4 (5mm) Solid State Lamp DESCRIPTION z The High Efficiency Red source color devices are.
Manufacture Kingbright
Datasheet
Download WP63ID Datasheet




Kingbright WP63ID
WP63ID
T-1 3/4 (5mm) Solid State Lamp
DESCRIPTION
z The High Efficiency Red source color devices are
made with Gallium Arsenide Phosphide on Gallium
Phosphide Orange Light Emitting Diode
FEATURES
z Low power consumption
z Popular T-1 diameter package
z General purpose leads
z Reliable and rugged
z Long life - solid state reliability
z Available on tape and reel
z RoHS compliant
APPLICATIONS
z Status indicator
z Illuminator
z Signage applications
z Decorative and entertainment lighting
z Commercial and residential architectural lighting
PACKAGE DIMENSIONS
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change
without prior notice.
SELECTION GUIDE
Part Number
Emitting Color
(Material)
Lens Type
WP63ID
High Efficiency Red
(GaAsP/GaP)
Red Diffused
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAE9549 / 1101006146 Rev No: V.9A Date: 07/06/2017
Iv (mcd) @ 10mA [2]
Min.
Typ.
10 20
*8 *12
Viewing Angle [1]
2θ1/2
60°
Page 1 / 5



Kingbright WP63ID
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 10mA
Dominant Wavelength IF = 10mA
Spectral Bandwidth at 50% Φ REL MAX
IF = 10mA
Capacitance
λpeak
λdom [1]
Δλ
C
High Efficiency Red
High Efficiency Red
High Efficiency Red
High Efficiency Red
Forward Voltage IF = 10mA
VF [2]
High Efficiency Red
Reverse Current (VR = 5V)
IR High Efficiency Red
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
WP63ID
Value
Typ.
Max.
627 -
617 -
45 -
15 -
1.9 2.3
- 10
Unit
nm
nm
nm
pF
V
uA
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Value
Power Dissipation
PD 75
Reverse Voltage
VR 5
Junction Temperature
Tj
125
Operating Temperature
Top -40 To +85
Storage Temperature
Tstg -40 To +85
DC Forward Current IF 30
Peak Forward Current
IFM [1]
160
Electrostatic Discharge Threshold (HBM)
Lead Solder Temperature [2]
-
8000
260°C For 3 Seconds
Lead Solder Temperature [3]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
4. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAE9549 / 1101006146 Rev No: V.9A Date: 07/06/2017
Unit
mW
V
°C
°C
°C
mA
mA
V
Page 2 / 5



Kingbright WP63ID
WP63ID
TECHNICAL DATA
RELATIVE INTENSITY vs. WAVELENGTH
100%
80%
Ta = 25 °C
Red
60%
40%
20%
0%
350 400 450 500 550 600 650 700 750 800
Wavelength (nm)
SPATIAL DISTRIBUTION
-15° 15°
Ta = 25 °C
-30°
30°
-45° 45°
-60° 60°
-75° 75°
-90° 90°
1.0 0.5 0.0 0.5 1.0
Forward Current vs.
Forward Voltage
20
Ta = 25 °C
16
12
8
4
0
1.3 1.5 1.7 1.9 2.1 2.3
Forward voltage (V)
HIGH EFFICIENCY RED
Luminous Intensity vs.
Forward Current
2.5
Ta = 25 °C
2.0
Forward Current Derating Curve
50
40
1.5 30
1.0 20
0.5 10
0.0
0
4 8 12 16
Forward current (mA)
20
0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
Luminous Intensity vs.
Ambient Temperature
2.5
2.0
1.5
1.0
0.5
0.0
-40 -20 0 20 40 60 80 100
Ambient temperature (°C)
RECOMMENDED WAVE SOLDERING PROFILE
PACKING & LABEL SPECIFICATIONS
Notes:
1. Recommend pre-heat temperature of 105°C or less (as measured with a thermocouple
attached to the LED pins) prior to immersion in the solder wave with a maximum solder bath
temperature of 260°C
2. Peak wave soldering temperature between 245°C ~ 255°C for 3 sec (5 sec max).
3. Do not apply stress to the epoxy resin while the temperature is above 85°C.
4. Fixtures should not incur stress on the component when mounting and during soldering process.
5. SAC 305 solder alloy is recommended.
6. No more than one wave soldering pass.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAE9549 / 1101006146 Rev No: V.9A Date: 07/06/2017
Page 3 / 5







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)