RF Inductors. TRMB100505 Datasheet

TRMB100505 Inductors. Datasheet pdf. Equivalent

TRMB100505 Datasheet
Recommendation TRMB100505 Datasheet
Part TRMB100505
Description Multilayer Bead RF Inductors
Feature TRMB100505;  Product Introduction Token RF inductor chip multilayer bead offer high impedance for high speed si.
Manufacture Token
Datasheet
Download TRMB100505 Datasheet




Token TRMB100505
Product Introduction
Token RF inductor chip multilayer bead
offer high impedance for high speed signals.
Features :
Low DC Resistance.
Effective EMI Protection.
Multiple Size Availability.
High Soldering Heat Resistance.
Applications :
Portable Equipment.
Personal Computers.
CD-ROM, Hard Disk, Modem,Printers.
Token Electronics has introduced the (TRMB) Series, a family
of twelve multilayer chip bead inductors offering high
impedance. The (TRMB) Bead series is a multilayer technology
with good overall characteristics in a cost effective package. In
addition, (TRMB) parts offer a high-performance noise-filtering
capability over a wide range of high frequencies.
In systems that currently use multiple narrow-band inductors to
cover a wide frequency range, the (TRMB) can provide the same
function in a single chip, reducing component count and board
area. The (TRMB) multilayer inductor series is available in 1812,
1806, 1210, 1206, 0805, 0603, and 0402 sizes in three catalogs, standard, low profile, and High Speed
Signals. This product provides a good addition of electrical performance and low cost.
Token Multilayer Bead RF Inductor (TRMB) series is primarily designed for effective EMI protection
and low dc resistance. Full series conform to the RoHS directive and Lead-free. Multilayer Bead Chip
Inductor with wide inductance selection and impedance can be customed designs and tighter tolerances
available on request.
Application of specific designs also available including different factor values to frequency
requirements. Custom parts are available on request. Token will also produce devices outside these
specifications to meet specific customer requirements, Contact us with your specific needs. For more
information, please link to Token official website RF Inductors.
http://www.token.com.tw
rfq@token.com.tw
Taiwan Factory: +886 2 29810109
China Factory: +86 755 26055363
Page: 1/17



Token TRMB100505
Dimensions
Configurations & Dimensions (Unit: mm) (TRMB)
Type
A B C D EFG
TRMB100505 (0402)
1.0 ± 0.10 0.50 ± 0.10 0.5 ± 0.10 0.25 ± 0.10 0.4 1.2~1.4 0.4
TRMB160808 (0603)
1.6 ± 0.20 0.80 ± 0.15 0.8 ± 0.15 0.30 ± 0.20 0.8 2.4~3.4 0.6
TRMB201209 (0805)
2.0 ± 0.20 1.25 ± 0.20 0.9 ± 0.20 0.50 ± 0.30 1.2 3.0~4.0 1.0
TRMB321611 (1206)
3.2 ± 0.20 1.60 ± 0.20 1.1 ± 0.20 0.50 ± 0.30 2.0 4.2~5.2 1.2
TRMB321616 (1206)
3.2 ± 0.20 1.60 ± 0.20 1.6 ± 0.20 0.50 ± 0.30 2.0 4.2~5.2 1.2
TRMB322513 (1210)
3.2 ± 0.20 2.50 ± 0.20 1.3 ± 0.20 0.50 ± 0.30 2.0 5.5~6.5 1.8
TRMB451616 (1806)
4.5 ± 0.25 1.60 ± 0.20 1.6 ± 0.20 0.50 ± 0.30 3.0 5.5~6.5 1.2
TRMB453215 (1812)
4.5 ± 0.25 3.20 ± 0.20 1.5 ± 0.20 0.50 ± 0.30 3.0 5.5~6.5 2.4
(TRMB) Recommended Pattern and Dimensions (Unit: mm)
http://www.token.com.tw
rfq@token.com.tw
Taiwan Factory: +886 2 29810109
China Factory: +86 755 26055363
Page: 2/17



Token TRMB100505
Characteristics
Environmental Characteristics (TRMB)
Item
Flexure Strength
Vibration
Resistance to Soldering
Heat
Solderability
Terminal Strength Test
Temperature Cycle
Humidity Resistance
High Temperature
Resistance
Low Temperature
Resistance
Specification
Test Methods
Test device shall be soldered on the substrate
Dimension:100×40×1.6
mm
Deflection: 2.0mm
The forces applied on the right
conditions must not damage the
terminal electrode and the ferrite
Keeping Time: 30sec
For 0402, substrate
dimension is
100×40×0.8mm
Test device shall be soldered on the substrate
Oscillation Frequency : 10 to 55 to 10Hz for 1min
Amplitude : 1.5mm
Time : 2hrs for each axis (X,Y&Z), total 6hrs
Appearance: No damage
More than 75% of the terminal
electrode should be covered with
solder.
Impedance: within± 30% of initial
Pre-heating: 150, 1min
Solder Temperature: 260 ± 5
Immersion Time: 10 ± 1sec
value
The electrodes shall be at least Pre-heating: 150, 1min
90% covered with new solder
coating
Solder Temperature: 245 ± 5
Immersion Time: 4 ± 1sec
0402 series : ≥0.2kg
0603 series : ≥0.5kg
0805 series : ≥1.0kg
other series : ≥ 2.0kg
Test device shall
be soldered on
the substrate
One cycle:
One cycle/step1: -55 ± 3for 30min
step2: 25 ± 2for 3.0min
step3:125 ± 3for 30min
step4:25 ± 2for 3.0min
Appearance: No damage
Impedance: within ± 30% of
initial value
Total: 100cycles
Measured after exposure in the room condition for 24hrs
Temperature: 40 ± 2
Relative Humidity: 90 ~ 95% time: 1000hrs
Measured after exposure in the room condition for 24hrs
Temperature: 125 ± 3
Relative Humidity : 0%
Applied Current: Rated Current time: 1000hrs
Measured after exposure in the room condition for 24hrs
Temperature: -55 ± 3
TR relative Humidity : 0% time: 1000hrs
Measured after exposure in the room condition for 24hrs
http://www.token.com.tw
rfq@token.com.tw
Taiwan Factory: +886 2 29810109
China Factory: +86 755 26055363
Page: 3/17







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)