VACUUM FLUORESCENT DISPLAY MODULE
AN-E-2335
APPLICATION NOTE
VACUUM FLUORESCENT DISPLAY MODULE
CHARACTER DISPLAY MODULE
M162SD13AA
GENERAL DESCRIPTION Fut...
Description
AN-E-2335
APPLICATION NOTE
VACUUM FLUORESCENT DISPLAY MODULE
CHARACTER DISPLAY MODULE
M162SD13AA
GENERAL DESCRIPTION Futaba Vacuum Fluorescent Display Module M162SD13AA, with Futaba VFD 162-SD-13INK display, produces 16 digits×2 rows with 5×7 dot matrix. Consisting of a VFD, one chip controller and DC-DC/AC converter, the module can be operated by a synchronous serial interface, and only 5 voltage power source is required to operate the module.
! Important Safety Notice
Please read this note carefully before using the product.
Warning
The module should be disconnected from the power supply before handling. The power supply should be switched off before connecting or disconnecting the power
or interface cables. The module contains electronic components that generate high voltages (approx. 40V)
which may cause an electrical shock when touched. Do not touch the electronic components of the module with any metal objects. The VFD used on the module is made of glass an...
Similar Datasheet