Hex D Master-Slave Flip-Flop
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Hex D Master-Slave Flip-Flop With Reset
MC10186
The MC10186 contains six high–sp...
Description
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Hex D Master-Slave Flip-Flop With Reset
MC10186
The MC10186 contains six high–speed, master slave type “D” flip–flops. Clocking is common to all six flip–flops. Data is entered into the master when the clock is low. Master to slave data transfer takes place on the positive–going Clock transition. Thus, outputs may change only on a positive–going Clock transition. A change in the information present at the data (D) input will not affect the output information any other time due to the master–slave construction of this device. A COMMON RESET IS INCLUDED IN THIS CIRCUIT. RESET ONLY FUNCTIONS WHEN CLOCK IS LOW.
PD = 460 mW typ/pkg (No Load) ftoggle= 150 MHz (typ)
tr, tf = 2.0 ns typ (20%–80%)
LOGIC DIAGRAM
D0 5
2 Q0
D1 6
3 Q1
D2 7
4 Q2
D3 10
13 Q3
D4 11
D5 12 CLOCK 9 RESET 1
VCC = PIN 16 VEE = PIN 8
14 Q4
15 Q5
CLOCKED TRUTH TABLE
RCD
Qn + 1
LLX L H* L
Qn L
L H* H
H
HLX
L
*A clock H is a clock transition from a ...
Similar Datasheet