SMBJ22A Diode Datasheet

SMBJ22A Datasheet, PDF, Equivalent


Part Number

SMBJ22A

Description

Surface Mount Transient Voltage Suppressors Diode

Manufacture

JGD

Total Page 5 Pages
Datasheet
Download SMBJ22A Datasheet


SMBJ22A
Features
SMBJ3.3A THRU SMBJ440A
Surface Mount Transient Voltage Suppressors Diode
* For surface mounted application
* Low profile package
* Buit-in strain relief
* Glass passivated junction
* Excellent clamping capability
* Fast response time: typically less than 1.0ps
from 0 volts to BV min
* Typical IR less than 1μA above 10V
* High temperature soldering:
260/10 seconds at terminals
* Plastic material used carries underwriters
laboratory flammability classifications 94V-0
Mechanical Data
Package Outline Dimensions in inches (millimeters)
SMB
* Case: Molded plastic
* Terminals: Solder plated
* Polarity: Indicated by cathode band
* Standard Packaging: 12mm tape per EIA STD RS-481
Maximum Ratings and Electrical Characteristics
Rating at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Type Number
Symbol
Peak Power Dissipation at TA=25, TP=1ms(Note1)
PPPM
Peak Forward Surge Current, 8.3ms single half sine-wave
superimposed on rated load(JEDEC method) (Note2/3)
Unidirectional only.
IFSM
Operating and Storage Temperature Range
TJ/TSTG
Note:1Non-repetitive current pulse per Fig.3 and debated above TA=25per Fig.2.
2Mounted on 0.2×0.2”(5.0×5.0mm) copper pads to each terminal.
38.3ms single half sine-wave duty cycle=4 pulses per minutes maximum.
Devices for Bipolar Applications or Equivalent Square Wave
1For bidirectional use C or CA suffix for types SMBJ5.0 thru types SMBJ440.
2Electrical characteristics apply in both directions.
Value
Minimum 600
100
-55 to +150
Unit
Watt
Amp
Version: 6.1
www.jgdsemi.com

SMBJ22A
Ratings and Characteristic Curves
SMBJ3.3A THRU SMBJ440A
Surface Mount Transient Voltage Suppressors Diode
Version: 6.1
www.jgdsemi.com


Features Features SMBJ3.3A THRU SMBJ440A Surface Mount Transient Voltage Suppressors Di ode * For surface mounted application * Low profile package * Buit-in strain relief * Glass passivated junction * Ex cellent clamping capability * Fast resp onse time: typically less than 1.0ps fr om 0 volts to BV min * Typical IR less than 1μA above 10V * High temperature soldering: 260℃/10 seconds at termina ls * Plastic material used carries unde rwriters laboratory flammability classi fications 94V-0 Mechanical Data Packag e Outline Dimensions in inches (millime ters) SMB: * Case: Molded plastic * Terminals: Solder plated * Polarity: In dicated by cathode band * Standard Pack aging: 12mm tape per EIA STD RS-481 Ma ximum Ratings and Electrical Characteri stics Rating at 25 ℃ ambient temperat ure unless otherwise specified. Single phase, half wave, 60 Hz, resistive or i nductive load. For capacitive load, der ate current by 20%. Type Number Symbo l Peak Power Dissipation at TA=25℃, TP=1ms(Note1) PPPM Pea.
Keywords SMBJ22A, datasheet, pdf, JGD, Surface, Mount, Transient, Voltage, Suppressors, Diode, MBJ22A, BJ22A, J22A, SMBJ22, SMBJ2, SMBJ, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)