PIC32MX250F256L

PIC32MX1XX/2XX/5XX 64/100-PIN 32-bit Microcontrollers (up to 512 KB Flash and 64 KB SRAM) with Audio/Graphics/Touch (HMI), CAN, USB, and Advanced Analog Operating Conditions 2.3V to 3.6V, -40ºC to +105ºC (DC to 40 MHz), -40ºC to +85ºC (DC to 50 MHz) Core: 50 MHz/83 DMIPS MIPS32® M4K® MIPS16e® mode for up to 40% smaller code size Code-efficient (C and Assembly) architecture Single-cycle (MAC) 32x16 and two-cycle 32x32 multiply Clock Management 0.9% internal oscillator Programmable PLLs and oscillator clock sources Fail-Safe Clock Monitor (FSCM) Independent Watchdog Timer Fast wake-up and start-up Power Management Low-power management modes (Sleep and Idle) Integrated Power-on Reset, Brown-out Reset, and High Voltage Detect 0.5 mA/MHz dynamic current (typical) 44 μA IPD current (typical) Audio/Graphics/Touch HMI Features External graphics interface with up to 34 PMP pins Audio data communication: I2S, LJ, RJ, USB Audio data control interface: SPI and I2C Audio data master clock: - Generation of fractional clock frequencies - Can be synchronized with USB clock - Can be tuned in run-time Charge Time Measurement Unit (CTMU): - Supports mTouch® capacitive touch sensing - Provides high-resolution time measurement (1 ns) Advanced Analog Features ADC Module: - 10-bit 1 Msps rate with one Sample and Hold (S&H) - Up to 48 analog inputs - Can operate during Sleep mode Flexible and independent ADC trigger sources On-chip temperature mea...