Lead TVS. 5KP110A Datasheet

5KP110A TVS. Datasheet pdf. Equivalent


Part 5KP110A
Description 5000 Watt Axial Lead TVS
Feature 5KP SERIES 5000 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS FEATURES * 5000 Watts Surge Capabili.
Manufacture GW
Datasheet
Download 5KP110A Datasheet


5KP5.0 THRU 5KP110A TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR 5KP110A Datasheet
RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION TVS 5KP SERIE 5KP110A Datasheet
5KP110A Datasheet
5KP Series Transient Voltage Suppression Diodes Axial Leade 5KP110A Datasheet
5KP SERIES Transient Voltage Suppressors(5000W) 1.0 (25.4) 5KP110A Datasheet
Elektronische Bauelemente 5KP SERIES Voltage 5V~190V 5000W 5KP110A Datasheet
05480 Only One Name Means ProTek’Tion™ 5kW POWER TVS COMPON 5KP110A Datasheet
5KP SERIES 5000 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSO 5KP110A Datasheet
SCOTTSDALE DIVISION 5KP5.0 thru 5KP110CA, e3 5000 W TRANSIE 5KP110A Datasheet
Axial Lead Transient Voltage Suppressors (TVS) 5KP Series 5. 5KP110A Datasheet
Recommendation Recommendation Datasheet 5KP110A Datasheet




5KP110A
5KP SERIES
5000 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS
FEATURES
* 5000 Watts Surge Capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time: Typically less than
1.0ps from 0 volt to BV min.
* Typical IR less than 1 A above 10V
VOLTAGE RANGE
5.0 to 440 Volts
5000 Watts Peak Power
R-6
.360(9.1)
.340(8.6)
DIA.
1.0(25.4)
MIN.
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: Axial leads, solderable per MIL-STD-202,
method 208 guranteed
* Polarity: Color band denotes cathode end
* Mounting position: Any
.360(9.1)
.340(8.6)
.052(1.3)
.048(1.2)
DIA.
1.0(25.4)
MIN.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATINGS
Peak Power Dissipation at TA=25 C, TP=1ms(NOTE 1)
SYMBOL
PPK
Power Dissipation on infinite heatsink at TL=75 C
Peak Forward Surge Current at 8.3ms Single Half Sine-Wave
superimposed on rated load (JEDEC method) (NOTE 3)
Maximum Instantenous Forward Voltage at 100A for
Unidirectional only
Operating and Storage Temperature Range
PD
IFSM
VF
TJ, TSTG
NOTES:
1. Non-repetitive current pulse per Fig. 3 and derated above TA=25 C per Fig. 2.
2. 8.3ms single half sine-wave, duty cycle = 4 pulses per minute maximum.
3. VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V.
VALUE
Minimum 5000
8.0
500
3.5/5.0
-55 to +150
UNITS
Watts
Watt
Amps
Volts
C
DEVICES FOR BIPOLAR APPLICATIONS
1. For Bidirectional use C or CA Suffix for types 5KP5.0 thru 5KP440.
2. Electrical characteristics apply in both directions.
364



5KP110A
RATING AND CHARACTERISTIC CURVES (5KP SERIES)
FIG.1-PEAK PULSE POWER DERATING CURVE
100
Non-Repetitive
Pulse Waveform
Shown in Fig. 3
TA=25 C
10
1.0
0.1
0.1ms
1.0ms
10ms
100ms
td, PULSE WIDTH, sec.
1.0ms
10ms
FIG.3-PULSE WAVE FORM
150
Tf=10 s
Peak Value
IPPM
100
TA=25 C
Pulse Width (td) is defined
as the point where the Peak
Current Deacys to 50% of Ipp
50
td
0
0 1.0
Half Value-IPPM
2
10/1000 sec Waveform
as Defined by R.E.A.
2.0
t, TIME, ms
3.0
4.0
FIG.2-PULSE DERATING CURVE
100
75
50
25
0
0 25 50 75 100 125 150 175
TA, AMBIENT TEMPERATURE ( C)
FIG.4-MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT, UNIDIRECTIONAL
500 TJ=TJmax
8.3ms Single Half Sine-wave
JEDEC Method
300
100
50
20
10
1
5 10
20
50
NUMBER OF CYCLES AT 60Hz
100
FIG.5-STEADY STATE POWER DERATING CURVE
8
6
4
2
0
0
25 50
75 100 125 150 175 200
TL, LEAD TEMPERATURE ( C)
365







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)