Octal Bus Transceivers (non-inverted open-collector outputs)
This octal bus transceivers is designed for asynchronous two-way communication between data buses. The devices
transmit data, from the A bus to the B bus or from the B bus to the A bus depending upon the level at the direction
control (DIR) input. The enable input (G) can be used to disable the device so that the buses are effectively isolated.
• Ordering Information
HD74LS641FPEL SOP-20 pin (JEITA)
Note: Please consult the sales office for the above package availability.
EL (2,000 pcs/reel)
19 Enable G
Rev.2.00, Feb.18.2005, page 1 of 6