1-bit to 2-bit Address Driver
HD74ALVCH162830
1-bit to 2-bit Address Driver with 3-state Outputs
REJ03D0040-0200Z (Previous ADE-205-197(Z))
Rev.2.00 O...
Description
HD74ALVCH162830
1-bit to 2-bit Address Driver with 3-state Outputs
REJ03D0040-0200Z (Previous ADE-205-197(Z))
Rev.2.00 Oct.02.2003
Description
This 1-bit to 2-bit address driver is designed for 2.3 V to 3.6 V VCC operation. To ensure the high impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current sinking capability of the driver. Active bus hold circuitry is provided to hold unused or floating inputs at a valid logic level. All outputs, which are designed to sink up to 12 mA, include equivalent 26 Ω resistors to reduce overshoot and undreshoot.
Features
VCC = 2.3 V to 3.6 V Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C) High output current ±12 mA (@VCC = 3.0 V) Bus hold on data inputs eliminates the need for external pullup / pulldown resistors All outputs have equivalent 26 Ω seri...
Similar Datasheet