n RoHS compliant* and halogen free**
n Surface Mount SMB package
n Breakdown Voltage: 6.8 to 550 volts
n Peak Pulse Power: 600 watts
n Typical temperature coefficient:
∆VBR = 0.1 % x VBR @ 25 °C x ∆T
n IEC 61000-4-2 ESD (Min. Level 4)
n IEC 61000-4-4 EFT
n IEC 61000-4-5 Surge
P6SMB Transient Voltage Suppressor Diode Series
The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop
increasingly smaller electronic components.
Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AA (SMB)
size format. The Transient Voltage Suppressor series offers a choice of Breakdown Voltages from 6.8 V up to 550 V. Typical fast response
times are less than 1.0 picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional devices from 0 V to Minimum
Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration
minimizes roll away.
Maximum Characteristics (@ TA = 25 °C Unless Otherwise Noted)
Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2)
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
Maximum Instantaneous Forward Voltage @ IPP = 50 A P6SMB6.8A ~ P6SMB200A
(For Unidirectional Units Only)
P6SMB220A ~ P6SMB550A
Operating Temperature Range
Storage Temperature Range
-55 to +150
-55 to +150
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
Tel: +886-2 2562-4117
Fax: +886-2 2562-4116
Tel: +36 88 520 390
Fax: +36 88 520 211
Tel: +1-951 781-5500
Fax: +1-951 781-5700
How to Order
6.8 to 550 = 6.8 to 550 VBD (Volts)
A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
P6SMB 6.8 CA
* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
**Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br)
and Chlorine (Cl) content is 1500 ppm or less.
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.