Low-Voltage, Dual SPDT, Audio Clickless
Switches with Negative Rail Capability
ELECTRICAL CHARACTERISTICS (continued)
(VCC = +2.7V to +5.5V, TA = -40°C to +85°C, unless otherwise noted. Typical values are at VCC = +3.0V, TA = +25°C, unless otherwise
noted.) (Note 1)
Comparator Output High
Comparator Output Low
Comparator Input Leakage
Comparator Switching Time
ISOURCE = 1mA
ISINK = 1mA
VCMP- = 0 to 2.7V
VCC = 2.7V, VCMP- = 0V to VCC,
from 50% of VCMP- to 50% of VCMPO
VCC = 5.5V, VIN_ = 0V or
VCC = 5.5V, VIN_ = 1.8V
VCC = 4.2V, VIN_ = 1.8V
Note 1: UCSP and TDFN parts are 100% tested at TA = +25°C only, and guaranteed by design over the specified temperature range.
Thin QFN parts are 100% tested at TA = +85°C only, and guaranteed by design over the specified temperature range.
Note 2: Signals on COM_, NO_, or NC_ exceeding VCC are clamped by internal diodes. Limit forward-diode current to maximum
Note 3: Thin QFN and UCSP are guaranteed by design; not production tested.
Note 4: ICOM for UCSP is 10mA.
Note 5: ∆RON = RON(MAX) - RON(MIN).
Note 6: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal ranges.
Note 7: MAX4764/MAX4764A/MAX4765 have an internal shunt switch when in off-state, which determines OFF current.
Note 8: Leakage parameters are 100% tested at maximum-rated hot operating temperature and guaranteed by design at TA = +25°C.
Note 9: UCSP parts are guaranteed by design.
Note 10: Off-isolation = 20log10 (VCOM / VNO), VCOM = output, VNO = input to off switch.
Note 11: Guaranteed by design, not production tested.