BSFC-Series Single Conversion IF Output Satellite Tuner
PRODUCT INFORMATION
APPLICATIONS: • Satellite receiver • Data receiver • Wide-band front end
RF Components Group
BSFC-...
Description
PRODUCT INFORMATION
APPLICATIONS: Satellite receiver Data receiver Wide-band front end
RF Components Group
BSFC-Series Single Conversion IF Output Satellite Tuner
NEW HIGH PERFORMANCE TUNERS WITH VERSATILITY FOR HANDLING ANALOG OR DIGITAL VIDEO. FEATURES
First LO PLL tuning Low noise figure, 9 db typical (model dependent) 50 db typical AGC range RF and IF AGC provided in all models Conversion gain range from 20 db to 70 db, typical Low phase noise Input and output impedance: 75 Ω Maximum input level: -20 dBm
STANDARD BSFC VERTICAL PACKAGE
New BSFC-Series tuners use SHARP’s latest technology to provide reception of either modulated analog or digital data streams. Four different tuner models with varying performance characteristics can be used as receivers for analog or digital video, and for data streams. Each tuner’s local oscillator is phase-lock loop-tuned using a 3-wire serial bus. The conversion intermediate frequency is filtered and provided on a pin at 479.5 MHz. In addition, IF ACG control is provided. Both horizontal and vertical (pictured) package styles are available, along with a wide variety of SAW filters. Dual input versions may be available upon request. Filter configurations not shown in the model selection guide on back may also be available upon request.
ETUN18-1
PRODUCT INFORMATION
MODEL SELECTION GUIDE
MODEL BSFC77GV6 BSFC77GV8 BSFC78GW4 BSFC78GW6 I N P U T F R E Q U E N C Y, MHz 950 - 2050 950 - 2050 950 - 2150 950 - 2150 BA N...
Similar Datasheet