EVALUATION KIT AVAILABLE
MAX712/MAX713
NiCd/NiMH Battery Fast-Charge Controllers
General Description
The MAX712/MAX71...
EVALUATION KIT AVAILABLE
MAX712/MAX713
NiCd/NiMH Battery Fast-Charge Controllers
General Description
The MAX712/MAX713 fast-charge Nickel Metal Hydride (NiMH) and Nickel Cadmium (NiCd) batteries from a DC source at least 1.5V higher than the maximum battery voltage. 1 to 16 series cells can be charged at rates up to 4C. A voltage-slope detecting analog-to-digital converter, timer, and temperature window comparator determine charge completion. The MAX712/MAX713 are powered by the DC source via an on-board +5V shunt
regulator. They draw a maximum of 5µA from the battery when not charging. A low-side current-sense resistor allows the battery charge current to be regulated while still supplying power to the battery’s load.
The MAX712 terminates fast charge by detecting zero voltage slope, while the MAX713 uses a negative voltage-slope detection scheme. Both parts come in 16pin DIP and SO packages. An external power
PNP transistor, blocking diode, three resistors, and three capacitors...