NTSC/PAL Digital Video Encoder
VP5311B/VP5511B
Supersedes DS4575 1.5 May 1997 version
NTSC/PAL Digital Video Encoder Advance Information
DS4575 - 2.2...
Description
VP5311B/VP5511B
Supersedes DS4575 1.5 May 1997 version
NTSC/PAL Digital Video Encoder Advance Information
DS4575 - 2.2 October 1998
The VP5311/VP5511 converts digital Y, Cr, Cb, data
into analog NTSC/PAL composite video and S-video signals.
The outputs are capable of driving doubly terminated 75
ohm loads with standard video levels.
The device accepts data inputs complying with CCIR
Recommendation 601 and 656. The data is time multiplexed
on an 8 bit bus at 27MHz and is formatted as Y, Cr, Y, Cb
(i.e. 4:2:2). The video blanking and sync information from
REC 656 is included in the data stream when the VP5311/
VP5511 is working in slave mode.
The output pixel rate is 27MHz and the input pixel rate
is half this frequency, i.e. 13.5MHz.
All necessary synchronisation signals are generated
internally when the device is operating in master mode. In
slave mode the device will lock to the TRS codes or the HS and VS inputs.
PIN 64
The rise and fall times of sync, burst envelop...
Similar Datasheet