GBJ10005 THRU GBJ1010
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
REVERSE VOLTAGE:
FORWARD CURRENT:
50 to 1000 VOLTS
10.0 AMPERE
FEATURES
· Low forward voltage drop,high current capability
· Ideal for printed circuit board
· Plastic material has Underwriters Laboratory
Flammability Classification 94V-0
· Reliable low cost construction utilizing molded
plastic technique
MECHANICAL DATA
Case: Molded plastic, GBJ
Epoxy: UL 94V-O rate flame retardant
Terminals: Leads solderable per MIL-STD-202,
method 208 guaranteed
Mounting position: Any
Weight: 0.23ounce, 6.6gram
GBJ
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave, 60HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
with Heatsink at TC=110℃
Peak Forward Surge Current,
8.3ms single half-sine-wave
superimposed on rated load (JEDEC method)
Maximum Forward Voltage Drop per Element
at 5.0A DC and 25℃
Maximum Reverse Current
at Rated DC Blocking Voltage
at TA=25℃
TA=125℃
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
Symbols GBJ10005 GBJ1001 GBJ1002 GBJ1004 GBJ1006 GBJ1008 GBJ1010
VRRM 50 100 200 400 600 800 1000
VRMS
35
70 140 280 420 560 700
VDC 50 100 200 400 600 800 1000
Units
Volts
Volts
Volts
I(AV) 10.0 Amp
IFSM 170 Amp
VF
IR
CJ
RθJC
TJ，Tstg
1.05
5.0
500
55
1.4
-55 to +150
Volts
uAmp
pF
℃/W
℃
NOTES:
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
2- Thermal Resistance fromn Junction to Case with Device Mounted on 150mm x 150mm x 1.6mmCu Plate Heatsink.
