BRIDGE RECTIFIER. KBL406 Datasheet

KBL406 RECTIFIER. Datasheet pdf. Equivalent

KBL406 Datasheet
Recommendation KBL406 Datasheet
Part KBL406
Description SINGLE-PHASE SILICON BRIDGE RECTIFIER
Feature KBL406; KBL4005 THRU KBL410 SINGLE-PHASE SILICON BRIDGE RECTIFIER REVERSE VOLTAGE: 50 to 1000 VOLTS FORW.
Manufacture Hornby
Datasheet
Download KBL406 Datasheet




Hornby KBL406
KBL4005 THRU KBL410
SINGLE-PHASE SILICON BRIDGE RECTIFIER
REVERSE VOLTAGE:
50 to 1000 VOLTS
FORWARD CURRENT:
4.0 AMPERE
FEATURES
· Surge overload rating: 200 amperes peak
· Ideal for printed circuit board
· Plastic material has Underwriters Laboratory
Flammability Classification 94V-0
· Reliable low cost construction utilizing molded
plastic technique
MECHANICAL DATA
Case: Molded plastic, KBL
Epoxy: UL 94V-O rate flame retardant
Terminals: Leads solderable per MIL-STD-202,
method 208 guaranteed
Mounting position: Any
Weight: 0.2ounce, 5.6gram
KBL
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Ratings at 25ambient temperature unless otherwise specified.
Single phase, half wave, 60HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
.375"(9.5mm) Lead Length at TA=50
Peak Forward Surge Current,
8.3ms single half-sine-wave
superimposed on rated load (JEDEC method)
Maximum Forward Voltage
at 4.0A DC and 25
Maximum Reverse Current
at Rated DC Blocking Voltage
at TA=25
TA=100
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance (Note 2)
Typical Thermal Resistance (Note 3)
Operating and Storage Temperature Range
Symbols KBL4005 KBL401
VRRM 50 100
VRMS
35
70
VDC 50 100
KBL402
200
140
200
KBL404
400
280
400
KBL406
600
420
600
KBL408
800
560
800
KBL410
1000
700
1000
Units
Volts
Volts
Volts
I(AV) 4.0 Amp
IFSM 200 Amp
VF
IR
CJ
RθJA
RθJL
TJTstg
1.1
10.0
500
40
19
2.4
-55 to +125
Volts
uAmp
pF
/W
/W
NOTES:
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
2- Thermal resistance from junction to ambient with units mounted on 3.0 x 3.0 x 0.11” thick (7.5 x 7.5 x 0.3cm) Al. plate
3- Thermal resistance from junction to lead with units mounted on P.C.B. at 0.375" (9.5mm) lead length and 0.5 x 0.5" (12 x 12mm) copper pads



Hornby KBL406
KBL4005 THRU KBL410
SINGLE-PHASE SILICON BRIDGE RECTIFIER
RATINGS AND CHARACTERISTIC CURVES







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)